10-1119.1199 EAO, 10-1119.1199 Datasheet - Page 81

• Manufacturer Part Number: 10-1119.1199
• Description: FILAMENT LAMP
• Manufacturer: EAO

Specifications of 10-1119.1199

• Supply Voltage: 48V
• Current Rating: 25mA
• For Use With: SWISSTAC Series Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Switch interlock system
Switch interlock systems do away with complicated protective and relay interlocks.
SWISSTAC switches with mounting depths of 55 mm and 70 mm can be combined into interlocking systems of up to 20 switches. The only exeption
is variant 7 of the interlocking system with pushbutton (see below), where the maximum number of combined switches is 10. The switches are
mechanically interlocked. There are two types to choose from:
1. Switch interlock system with pushbutton
2. Switch interlock system with keylock switch
The distance separating switches in an interlock system can be increased in steps of 6 mm from a minimum of 18 mm (between switch
centre-lines). Irregular spacings and/or blanks in a system are also possible. No special cutouts in the fascia panel are required, as the hole
patterns match the individual switches.
All switch interlock systems are supplied ready for mounting. Splash-proof versions are obtainable with bezels of 24 mm dia. or 24 x 24 mm. The
interlock system withstands a pressure of at least 50 N.
>
For each type of switch interlock system there is a choice of seven different variants:
Variant 1
Momentary action possible only with one pushbutton at a time, as the buttons are interactively blocked mechanically.
Variant 2
Maintained action of one pushbutton at a time. This blocks the other buttons mechanically and is only released by pressing the actuated pushbutton
again.
Variant 3
Maintained action of one pushbutton at a time. If an other button is pressed, the first resets. One button is normally always "On".
Variant 4
Maintained action of one pushbutton at a time. If an other button is pressed, the first resets. The release button cancels the "On" condition.
Variant 5
Maintained action of one or more pushbuttons pressed simultaneously. If one or more buttons are operated simultaneously, the button or group of
buttons pressed befor are reset. Switching "Off" is done only with the release button.
Variant 6
Maintained action of one pushbutton at a time. Another button cannot be operated until the first has been reset with the release button. All buttons
are then at "Zero".
Variant 7
Maintained action of any one switch, which can also be operated one after the other. Actuated buttons can only be reset with the release button.
0
>
General notes
Variants of switch interlock system
Action
latching
mutual mechanical release
individual release by pressing again
all released with release button
mutual mechanical blocking
Variant
1
●
2
●
●
●
3
●
●
●
4
●
●
●
●
5
●
●
●
Swisstac
6
●
●
●
02.2009
79
7
●
●