10-1119.1199 EAO, 10-1119.1199 Datasheet - Page 10

• Manufacturer Part Number: 10-1119.1199
• Description: FILAMENT LAMP
• Manufacturer: EAO

Specifications of 10-1119.1199

• Supply Voltage: 48V
• Current Rating: 25mA
• For Use With: SWISSTAC Series Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Mounting instruction
The switch is mounted in a fascia or control panel in three steps:
1. Remove front section as in drawing.
2. Insert switch from the back side in fascia/control panel.
3. Snap on front section (see note) and tighten fixing nut.
0
Zero position
0
Note !
To assemble, the key must be at the zero position. The symbol 0 is at the top, and on the terminal block the circuit diagram is uppermost.
>
The switch is mounted in a fascia or control panel in three steps:
1. Remove front section as in drawing.
2. Insert switch from the back side in fascia/control panel.
3. Snap on front section (see note) and tighten fixing nut.
0
Zero position
0
Note !
To assemble, the key must be at the zero position. The symbol 0 is at the top, and on the terminal block the circuit diagram is uppermost.
>
The switch is mounted in a fascia or control panel in three steps:
1. Detach terminal block as in drawing, remove fixing nut.
2. Insert switch from the front in fascia/control panel.
3. Reassemble the switch in the reverse order.
0
To detach terminal block
0
>
Keylock switch 55 mm
Keylock switch 70 mm
Selector switch 45 mm
8
02.2009
Wiring diagram
Wiring diagram
Swisstac