10-1119.1199 EAO, 10-1119.1199 Datasheet - Page 78

• Manufacturer Part Number: 10-1119.1199
• Description: FILAMENT LAMP
• Manufacturer: EAO

Specifications of 10-1119.1199

• Supply Voltage: 48V
• Current Rating: 25mA
• For Use With: SWISSTAC Series Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Technical Data
Mechanical characteristics
Electrical characteristics
>
Switching system
Material
Mechanical characteristics
Electrical characteristics
Snap-action switching element
Holder for 3 switching elements
Stainless steel
Lamp terminal
CuBe, 2 μm Optalloy
Terminals
Soldering terminal (also pluggable 2.8 x 0.5 mm) or PCB terminal,
Brass gold plated
Wire cross-section 1.0 mm
Electric strength
2500 VAC, 50 Hz, 1 min. (functional isolation)
Isolation resistance
>10
Is equipped with double-break jump contacts. Owing to the large
cleaning path, outstanding self-cleaning is possible. The multilayer
contacts are designed for universal use. They are gilded with a 2 μm
gold coating. Each snap-action switching element comprises a NC
(normally closed contact) and a NO (normally open contact).
Housing
Polyethylene terephthalate (PETP), as per UL 94 V0
Contacts
AgNi, 2 μm gold plated
Contact carrier
Brass or CuBe
Terminals
Soldering terminal (also pluggable 2.8 x 0.5 mm) or PCB terminal,
Brass gold plated
Wire cross-section 1.0 mm
Actuating force
For each snap-action switching element approx. 2 N
Rebound time
typically 0.5 μs
Contact opening width
2 x 0.65 mm
Contact cleaning path
2 x 0.6 mm
Mechanical lifetime
2 million cycles of operation
Contact resistance
New state with gold plated contact ≤50 mΩ, statically
12
Ω
76
02.2009
2
2
max.
max.
0
Environmental conditions
>
Switching system
Material
Mechanical characteristics
Electrical characteristics
Slow-make switching element Stop pushbutton
Electrical life
>10 000 cycles of operation
EN IEC 60947-5-1, AC-12
Voltage
Current
EN IEC 61058-1 (inductive)
Voltage
Current
Conventional free air thermal current I
6 A from 1 to 3-poles switching element block
4 A for 4- and 5-poles Switching element block. Limited on thermal
reasons to I
Switch rating
as per EN IEC 61058-1
250 V, 5 A (non-inductive) up to 3 switching elements
250 V, 4 A (non-inductive) with 4 or 5 switching elements
250 V, 1,5 A (inductive) up to 3 switching elements
250 V, 1 A (inductive) with 4 or 5 switching elements
5 VAC/DC, 1 mA min.
Storage temperature
-40 °C ... +85 °C, as per EN IEC 60068
Operating temperature
-25 °C ... +55 °C, as per EN IEC 60068-2
Is equipped with rigid contact link. The slow-make element opens
positively and simply consists of a double-break NC. The multilayer
contacts are designed for universal use and are gilded with a 2 μm
gold coating. The Stop slow-make element is designed according
to EN IEC 60947-5-1.
Housing
Rynite (PET), as per UL 94 V0
Contacts
AgNi, 2 μm gold plated
Contact carrier
Brass or CuBe
Terminals
Soldering terminal (also pluggable 2.8 x 0.5 mm) or PCB terminal,
Brass gold plated
Wire cross-section 1.0 mm
Contact opening width
>2 x 1.5 mm
Mechanical lifetime
8 000 cycles of operation
Rated Operational Voltage U
250 VAC, as per EN IEC 60947-1
24 V
6 A
250 V
1.5 A
max.
= 4 A
48 V
6 A
2
75 V
5 A
max.
e
110 V
2 A
Swisstac
th
250 V
0.5 A