PIC18F1330T-I/SO Microchip Technology, PIC18F1330T-I/SO Datasheet - Page 193

• Manufacturer Part Number: PIC18F1330T-I/SO
• Description: 8KB, Flash, 256bytes-RAM, 16I/O, 8-bit Family,nanoWatt,MotorControl 18 SOIC .300
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F1330T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-SOIC (7.5mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PIC18F1330T-I/SOTR

REGISTER 20-2:
 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value when device is unprogrammed
bit 7-5
bit 4-3
bit 2-1
bit 0
Note 1:
U-0
—
2:
See Section 23.1 “DC Characteristics” for the specifications.
The Power-up Timer is decoupled from Brown-out Reset, allowing these features to be independently
controlled.
Unimplemented: Read as ‘0’
BORV1:BORV0: Brown-out Reset Voltage bits
11 = Minimum setting
00 = Maximum setting
BOREN1:BOREN0: Brown-out Reset Enable bits
11 = Brown-out Reset enabled in hardware only (SBOREN is disabled)
10 = Brown-out Reset enabled in hardware only and disabled in Sleep mode (SBOREN is disabled)
01 = Brown-out Reset enabled and controlled by software (SBOREN is enabled)
00 = Brown-out Reset disabled in hardware and software
PWRTEN: Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
•
•
•
U-0
—
CONFIG2L: CONFIGURATION REGISTER 2 LOW (BYTE ADDRESS 300002h)
P = Programmable bit
U-0
—
BORV1
R/P-1
(2)
(1)
U = Unimplemented bit, read as ‘0’
u = Unchanged from programmed state
BORV0
R/P-1
(1)
(2)
(1)
PIC18F1230/1330
BOREN1
R/P-1
(2)
BOREN0
R/P-1
DS39758D-page 193
(2)
PWRTEN
R/P-1
bit 0
(2)