KS8995X Micrel Inc, KS8995X Datasheet - Page 33

• Manufacturer Part Number: KS8995X
• Description: Special Function IC
• Manufacturer: Micrel Inc

Specifications of KS8995X

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Applications: *
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 5
• Internal Memory Buffer Size: 64
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII/SNI
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: 576-1021 - BOARD EVAL EXPERIMENT KS8995X
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

Port Registers
The following registers are used to enable features that are assigned on a per port basis. The register bit assignments are
the same for all ports, but the address for each port is different, as indicated.
Register 16 (0x10): Port 1 Control 0
Register 32 (0x20): Port 2 Control 0
Register 48 (0x30): Port 3 Control 0
Register 64 (0x40): Port 4 Control 0
Register 80 (0x50): Port 5 Control 0
December 2003
KS8995X
Address
Register 11 (0x0B): Global Control 9
7-2
1
0
Address
7
6
5
4
3
2
1
Name
Reserved
LED mode
Reserved
Name
Broadcast storm
protection enable
DiffServ priority
classification enable
802.1p priority
classification enable
Port-based priority
classification enable
Reserved
Tag insertion
Tag removal
Description
N/A
0 = led mode 0
1 = led mode 1
LEDX_2
LEDX_1
LEDX_0
Reserved
Description
1 = enable broadcast storm protection for ingress
packets on the port.
0 = disable broadcast storm protection.
1 = enable DiffServ priority classification for ingress
packets on port.
0 = disable DiffServ function.
1 = enable 802.1p priority classification for ingress
packets on port.
0 = disable 802.1p.
1 = ingress packets on the port will be classified as high
priority if “DiffServ” or “802.1p” classification is not
enabled or fails to classify.
0 = ingress packets on port will be classified as low
priority if “DiffServ” or “802.1p” classification is not
enabled or fails to classify.
Note: “DiffServ”, “802.1p” and port priority can be
enabled at the same time. The OR’ed result of 802.1p
and DSCP overwrites the port priority.
Reserved
1 = when packets are output on the port, the switch will
add 802.1q tags to packets without 802.1q tags when
received. The switch will not add tags to packets already
tagged. The tag inserted is the ingress port’s “port VID.”
0 = disable tag insertion.
1 = when packets are output on the port, the switch
will remove 802.1q tags from packets with 802.1q tags
when received. The switch will not modify packets
received without tags.
0 = disable tag removal.
33
Mode 0
Lnk/Act
Fulld/Col
Speed
Mode 1
100Lnk/Act
10Lnk/Act
Fulld
Mode
0
R/W
RW
Mode
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Default
Pin SMRXD0 strap
option. Pull-down(0):
Enabled led mode 0.
Pull-up(1): Enabled.
led mode 1.
Note: SMRXD0 has
internal pull-down 0.
0
Default
0
0
0
0
0
0
0
M9999-120403
Micrel