KS8995X Micrel Inc, KS8995X Datasheet - Page 30

• Manufacturer Part Number: KS8995X
• Description: Special Function IC
• Manufacturer: Micrel Inc

Specifications of KS8995X

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Applications: *
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 5
• Internal Memory Buffer Size: 64
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII/SNI
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: 576-1021 - BOARD EVAL EXPERIMENT KS8995X
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

KS8995X
M9999-120403
Address
Register 2 (0x02): Global Control 0 (continued)
2
1
0
Register 3 (0x03): Global Control 1
7
6
5
4
3
2
1
0
Name
Buffer share mode
UNH mode
Link change age
Pass all frames
Reserved
IEEE 802.3x transmit
flow control disable
IEEE 802.3x receive
flow control disable
Frame length field
check
Aging enable
Fast age enable
Aggressive back
off enable
Description
1 = buffer pool is shared by all ports. A port can use
more buffer when other ports are not busy.
0 = a port is only allowed to use 1/5 of the buffer pool.
1 = the switch will drop packets with 0x8808 in T/L
filed, or DA=01-80-C2-00-00-01.
0 = the switch will drop packets qualified as
“flow control” packets.
1 = link change from “link” to “no link” will cause fast
aging (<800 s) to age address table faster. After an
age cycle is complete, the age logic will return to
normal (300 75 seconds). Note: If any port is
unplugged, all addresses will be automatically aged
out.
1 = switch all packets including bad ones. Used solely
for debugging purpose. Works in conjunction with
sniffer mode.
Reserved
0 = will enable transmit flow control based on AN result.
1 = will not enable transmit flow control regardless of
AN result.
0 = will enable receive flow control based on AN result.
1 = will not enable receive flow controlregardless of
AN result.
Note: Bit 5 and bit 4 default values are controlled by
the same pin, but they can be programmed
independently.
1 = will check frame length field in the IEEE packets.
If the actual length does not match, the packet will be
dropped. (for L/T < 1500)
1 = Enable age function in the chip
0 = Disable aging function
1 = turn on fast age (800 s)
1 = enable more aggressive backoff algorithm in half-
duplex mode to enhance performance. This is not an
IEEE standard.
30
Mode
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Default
0x1
0
0
0
0
Pin PMRXD3 strap
option. Pull-down (0):
Enable tx flow
control. Pull-up (1):
Disable tx/rx flow
control.
Note: PMRXD3
has internal pull-
down.
Pin PMRXD3 strap
option. Pull-down (0):
Enable rx flow
control. Pull-up (1):
Disable tx/rx flow
control.
Note: PMRXD3
has internal pull-
down.
0
Pin LED[5][2] strap
option. Pull-down
(0): Aging disable.
Pull-up (1): Aging
Enable.
Note: LED[5][2]
has internal pull-up.
0
Pin PMRXD0 strap
option. Pull-down (0):
Disable aggressive
backoff. Pull-up (1):
Aggressive back
off. Note: PMRXD0
has internal pull-
down.
December 2003
Micrel