SAF-XC878CM-16FFI Infineon Technologies, SAF-XC878CM-16FFI Datasheet - Page 81

• Manufacturer Part Number: SAF-XC878CM-16FFI
• Description: MCU, 8BIT, 64K FLASH, 5V, 64LQFP
• Manufacturer: Infineon Technologies

Specifications of SAF-XC878CM-16FFI

• Controller Family/series: XC800
• Core Size: 8bit
• Program Memory Size: 64KB
• Ram Memory Size: 3328Byte
• No. Of Timers: 4
• No. Of Pwm Channels: 10
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 4.5V To
• Peripherals: ADC, PWM, Timer
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.7.2
When the XC878 is reset, it must identify the type of configuration with which to start the
different modes once the reset sequence is complete. Thus, boot configuration
information that is required for activation of special modes and conditions needs to be
applied by the external world through input pins. After power-on reset or hardware reset,
the pins MBC, TMS and P0.0 collectively select the different boot options.
shows the available boot options in the XC878.
Table 25
MBC
1) In addition to the pins MBC, TMS and P0.0, TM pin also requires an external pull down for all the boot options.
2) BSL mode is automatically entered if no valid password is installed and data at memory address 0000H equals
3) If a device is programmed as LIN, LIN BSL is always used instead of UART/MultiCAN.
4) UART or MultiCAN BSL is decoded by firmware based on the protocol for product variant with MultiCAN. If no
5) In MultiCAN BSL mode, the clock source is switched to XTAL by firmware, bypassing the on-chip oscillator.
6) Alternate BSL Mode is a user defined BSL code programmed in Flash. It is entered if the AltBSLPassword is
7) Normal user mode with standard JTAG (TCK,TDI,TDO) pins for hot-attach purpose.
Note: The boot options are valid only with the default set of UART and JTAG pins.
Data Sheet
1
0
0
1
zero.
MultiCAN and LIN variant, UART BSL is used.
This avoids any frequency invariance with the on-chip oscillator and allows other frequency clock input, thus
ensuring accurate baud rate detection (especially at high bit rates).
valid.
TMS P0.0
0
0
1
1
Booting Scheme
XC878 Boot Selection
X
X
0
0
Type of Mode
User Mode
BSL Mode; (LIN Mode
Mode
OSC/PLL non-bypassed
OCDS Mode; on-chip OSC/PLL non-
bypassed
User (JTAG) Mode
bypassed (normal)
4)5)
and Alternate BSL Mode
2)
; on-chip OSC/PLL non-bypassed
1)
72
7)
; on-chip OSC/PLL non-
3)
, UART/ MultiCAN
6)
); on-chip
Functional Description
PC Start Value
0000
0000
0000
0000
XC878CLM
V1.2, 2009-11
H
H
H
H
Table 25