SAK-C164CI-8EM Infineon Technologies, SAK-C164CI-8EM Datasheet - Page 24

• Manufacturer Part Number: SAK-C164CI-8EM
• Description: 16BIT MCU, 64K OTP, 4K RAM, CAN, 20MHZ
• Manufacturer: Infineon Technologies

Specifications of SAK-C164CI-8EM

• No. Of I/o's: 59
• Ram Memory Size: 2KB
• Cpu Speed: 20MHz
• No. Of Timers: 5
• Digital Ic Case Style: MQFP
• Supply Voltage: RoHS Compliant
• Core Size: 16bit
• Program Memory Size: 64KB
• Oscillator Type: External, Internal
• Controller Family/series: C164CI
• Rohs Compliant: Yes

The Capture/Compare Unit CAPCOM2
The general purpose CAPCOM2 unit supports generation and control of timing
sequences on up to 8 channels with a maximum resolution of 16 TCL. The CAPCOM
units are typically used to handle high speed I/O tasks such as pulse and waveform
generation, pulse width modulation (PMW), Digital to Analog (D/A) conversion, software
timing, or time recording relative to external events.
Two 16-bit timers (T7/T8) with reload registers provide two independent time bases for
the capture/compare register array.
Each dual purpose capture/compare register, which may be individually allocated to
either CAPCOM timer and programmed for capture or compare function, has one port
pin associated with it which serves as an input pin for triggering the capture function, or
as an output pin to indicate the occurrence of a compare event.
When a capture/compare register has been selected for capture mode, the current
contents of the allocated timer will be latched (‘capture’d) into the capture/compare
register in response to an external event at the port pin which is associated with this
register. In addition, a specific interrupt request for this capture/compare register is
generated. Either a positive, a negative, or both a positive and a negative external signal
transition at the pin can be selected as the triggering event. The contents of all registers
which have been selected for one of the five compare modes are continuously compared
with the contents of the allocated timers. When a match occurs between the timer value
and the value in a capture/compare register, specific actions will be taken based on the
selected compare mode.
Table 5
Compare Modes
Mode 0
Mode 1
Mode 2
Mode 3
Double
Register Mode
Data Sheet
Compare Modes (CAPCOM2)
Function
Interrupt-only compare mode;
several compare interrupts per timer period are possible
Pin toggles on each compare match;
several compare events per timer period are possible
Interrupt-only compare mode;
only one compare interrupt per timer period is generated
Pin set ‘1’ on match; pin reset ‘0’ on compare time overflow;
only one compare event per timer period is generated
Two registers operate on one pin; pin toggles on each compare
match;
several compare events per timer period are possible.
Registers CC16 & CC24 © pin CC16IO
Registers CC17 & CC25 © pin CC17IO
Registers CC18 & CC26 © pin CC18IO
Registers CC19 & CC27 © pin CC19IO
20
C164CL/SL
V2.0, 2001-05
C164CI/SI