MPC8313E-RDBC Freescale Semiconductor, MPC8313E-RDBC Datasheet - Page 50

• Manufacturer Part Number: MPC8313E-RDBC
• Description: BOARD CPU 8313E VER 2.2
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC II™ PROr
• Type: MPUr

Specifications of MPC8313E-RDBC

• Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MPC8313E

Revision History
50
Number
Rev.
3
4
3/2008
8/2008
Date
PowerQUICC™ MPC8313E Reference Design Board (RDB), Rev. 4
• Added GTX_CLK125 sourced from external 125 MHz oscillator.
• Added an optional IEEE 1588 connector (P10).
• Added three more resistor options (R311–R313) to route three IEEE 1588 signals that are
• Changed S4 to support LB_POR_CFG_BOOT_ECC_DIS.
• Changed SD chip select signal from SPISEL(GPIO31) to GPIO13.
• Added a Marvell 88E1111 PHY. Phy address assigned to 0x3. Use same IRQ3# as L2
• Added resistor option for RGMII signals route to either to L2 Switch or Marvell 88E1111
• Added SGMII support for eTSEC1 if using the added Marvell 88E1111 PHY. (SGMII for
• Added PLL CY23EP05SXC-1 U86 to PHY gerneated 125 MHz clock.
• Changed default TSEC1_GTX_CLK125 clock source to PLL CY23EP05SX-1 instead of
• Changed U36 1A linear regulator MIC39100-2.5WS to 3A MIC37302WR for higher 2.5V
• Changed default DAC to 16-bit SPI controlled MAX5203BEUB+ (U47).
only available in eTSEC1 to the IEEE 1588 connector.
Switch.
PHY.
eTSEC2 already supported.)
external 125 MHZ oscillator.
power consumption by additional PHY.
Table 25. Document Revision History (continued)
Substantive Change(s)
Freescale Semiconductor