NUTINY-SDK-M0516 Nuvoton Technology Corporation of America, NUTINY-SDK-M0516 Datasheet - Page 170

• Manufacturer Part Number: NUTINY-SDK-M0516
• Description: BOARD EVAL NUMICRO M051 SERIES
• Manufacturer: Nuvoton Technology Corporation of America
• Series: NuMicro M051™r
• Type: MCUr

Specifications of NUTINY-SDK-M0516

• Contents: Board, Cable
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: M051™ Series, M052/M054/M058/M0516

[4]
[3]
[2]
[1:0]
NuMicro M051
STO
SI
AA
Reserved
I2C STOP Control Bit
In master mode, setting STO to transmit a STOP condition to bus then I2C
hardware will check the bus condition if a STOP condition is detected this
bit will be cleared by hardware automatically. In a slave mode, setting STO
resets I2C hardware to the defined “not addressed” slave mode. This
means it is NO LONGER in the slave receiver mode to receive data from
the master transmit device.
I2C Interrupt Flag
When a new SIO state is present in the I2CSTATUS register, the SI flag is
set by hardware, and if bit EI (I2CON [7]) is set, the I2C interrupt is
requested. SI must be cleared by software. Clear SI is by writing one to this
bit.
Assert Acknowledge Control Bit
When AA=1 prior to address or data received, an acknowledged (low level
to SDA) will be returned during the acknowledge clock pulse on the SCL
line when 1.) A slave is acknowledging the address sent from master, 2.)
The receiver devices are acknowledging the data sent by transmitter. When
AA=0 prior to address or data received, a Not acknowledged (high level to
SDA) will be returned during the acknowledge clock pulse on the SCL line.
Reserved
™
Series Technical Reference Manual
- 170 -
Publication Release Date: Sep 14, 2010
Revision V1.2