MC10XS3535PNA Freescale Semiconductor, MC10XS3535PNA Datasheet - Page 34

• Manufacturer Part Number: MC10XS3535PNA
• Description: IC SWITCH HIGHSIDE 24PQFN
• Manufacturer: Freescale Semiconductor
• Type: High Side Switchr

Specifications of MC10XS3535PNA

• Number Of Outputs: 5
• Rds (on): 10 mOhm, 35 mOhm
• Internal Switch(s): No
• Voltage - Input: 7 V ~ 20 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 24-PQFN, 24-PowerQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current Limit: -

a high over-current shutdown phase (t
during low over-current shutdown thresholds. The current
recopy output delivers current only during ON time of the
output switch without overshoot (aperiodic settling).
precision can be improved significantly. One calibration point
at 25 °C for 50% of FSR allows removing part to part
contribution. So, the calibrated part precision goes down to
+/-6.0% over [20% - 75%] output current FSR, over voltage
range (10 V to 16 V) and temperature range (-40 to 125 °C).
allows diagnosing lamp damage in paralleling operations, like
as flasher topology. The
covering 99.74% of parts (device ageing not included) for
Standard lamps and LEDs.
Board Temperature Feedback
temperature on the GND flag. This analog feedback is
34
10XS353
FUNCTIONAL DEVICE OPERATION
PROTECTION AND DIAGNOSIS FEATURES
The current recopy feature for OUT1:5 is disabled during
The current recopy is not active in Fail mode.
With a calibration strategy, the output current sensing
With dedicated calibration points, the current recopy
The 10XS3535 provides a voltage proportional to the
Figure 15. Current sense precision with calibration
Orange = LED mode
Blue = lamp mode (default mode)
strategy for OUT1/5
Figure 15
summaries test results
2
) and is only enabled
available in CSNS output pin for MUX[2,0] bits set to “111”,
as described in
mode.
precision can be improved. So, one calibration point at 25 °C
allows removing part to part contribution, as presented in
Figure
Output Status
in real time through SPI. The OUT bit is set to logic [1] when
the corresponding output voltage is closed to half of battery.
This bit allows synchronizing current sense and diagnosing
short-circuit between OUT and VBAT terminals.
TEMPERATURE PREWARNING
reported via the SPI (OTW bit) in Normal mode. The
information is latched. To delatch, a read SPI command is
needed. In case of a Power on Reset, the fault will be reset.
The board temperature feedback is not active in Fail
With a calibration strategy, the temperature monitoring
The 10XS3535 provides the state of OUT1:OUT5 outputs
The 10XS3535 provides a temperature prewarning
2.5
1.5
0.5
2.5
1.5
0.5
2
1
0
2
1
0
-40
Figure 17. Analog temperature precision with
-40
17.
Figure 16. Analog temperature precision
-20
-20
0
Figure
0
typ
min
max
typ
min
max
20
calibration strategy
20
Analog Integrated Circuit Device Data
16.
40
40
Board tem perature (°C)
Board tem perature (°C)
60
60
80
80
Freescale Semiconductor
100
100
120
120
140
140
160
160
180
180