734185-1 Tyco Electronics, 734185-1 Datasheet - Page 3

• Manufacturer Part Number: 734185-1
• Description: Crimping, Stripping, Cutting Tools & Drills STRIP TOOL
• Manufacturer: Tyco Electronics
• Type: Wire Stripperr

Specifications of 734185-1

• Product: Crimping, Stripping & Cutting Tools & Drills
• Wire Gauge Range: 28-10
• For Use With: PVC, THHN, THHW Wires
• Lead Free Status / RoHS Status: na

6. ORDERING INFORMATION / REPLACEMENT PARTS
The only part that is replaceable is Wire Stripper Blade
Assembly 1424946-1. Order this part or additional wire
strippers through your Tyco Electronics
Representative, or call 1-800-526-5142, or send a
facsimile of your purchase order to 717-986-7605, or
write to:
Rev A
Lower
Stripping
Jaw
Upper
Stripping
Jaw
4. Insert the spring into the upper stripping jaw by
bending it at an angle as shown in Figure 6.
5. While maintaining spring pressure, rotate the
upper stripping jaw pivot counterclockwise, and
engage the pivot pin.
6. Ensure that the upper stripping jaw is in proper
position in the tool housing.
7. Replace the wire stop.
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
Screwdriver
Screwdriver
Figure 5
7. REVISION SUMMARY
Since the previous release of this document, the TE
logo has been applied.
Top View
Side View
Figure 6
Upper Jaw
(About 90º to Tool)
Pivot Pin
Spring at
Angle
408-8907
3 of 3