L300 Protek, L300 Datasheet - Page 17

• Manufacturer Part Number: L300
• Description: Bench Top Power Supplies 300WATT PROG ELECT LOAD
• Manufacturer: Protek

Specifications of L300

• Output Current (channel 1): 30 A
• Output Voltage (channel 1): 0 VAC to 360 VAC
• Input Voltage: 120 V to 220 V
• Number Of Outputs: 1
• Output Voltage (1): 0 VAC to 360 VAC
• Output Current (1): 30 A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6) The second power to be entered is 100W, Enter 100 from the numeric keypad or rotary dial.
7) The time duration for the second power is 60 seconds, enter 60, then press OK the LCD
9) The time duration for the third power is 120 seconds, enter 120, then press OK the LCD
10) If one time is selected the above program will be executed once. If repeat is selected the
8) The third power is 150W, enter 150, and then press OK, the LCD will display
11) Press exit when finished.
To stop the program from executing, Press the Stop key. (. keypad)
13 this program may be stored in memory by pressing the Store key, and then enter a
12) Pressing the start Key (keypad 7) the following program will run
Press OK, The LCD will now display
will display
will display
program will loop continuously.
location between 1 and 9 from the keypad or rotary dial Press OK to enter (see 2.3.4).
Step 1
Step 2
Step 3
50W for 30 seconds
100W for 60 seconds
150W for 120 seconds
17
STE STEP TIME = 1S
NEW= 120
STEP TIME = 1S
NEW= 60
STEP 3 SET = 0.0
NEW= 150
REPEAT
ONE TIME