CSTCW48M0X51-R0 Murata, CSTCW48M0X51-R0 Datasheet - Page 47

• Manufacturer Part Number: CSTCW48M0X51-R0
• Description: Resonators 48MHz
• Manufacturer: Murata
• Series: CSTCW-Xr

Specifications of CSTCW48M0X51-R0

• Tolerance: 0.5 %
• Termination Style: SMD/SMT
• Operating Temperature Range: - 20 C to + 80 C
• Dimensions: 2 mm W x 2.5 mm L x 1.5 mm H
• Frequency Stability: 0.2 %
• Frequency: 48 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
CSBLA_E
The component cannot withstand washing.
Please do not apply excessive mechanical stress to the
component and lead terminals during soldering.
CSBLA_J
1. Cleaning Solvents
2. Temperature Difference: dT *1
3. Conditions
CSBFB_J/CSBLA_J
1. Product Storage Condition
2. Expire Date on Storage
3. Notice on Product Storage
46
kHz Type Notice for General Usage
(1) Ultrasonic Wash
(2) Immersion Wash
(3) Shower or Rinse Wash
(1) Please do not store the products in a chemical
HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care FRW.
dT<=30 C. (dT=Component-solvent)
*1 ex. In case the component at +90 degree C
Please store the products in room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Expire date (Shelf life) of the products is six
months after delivery under the conditions of a
sealed and an unopened package. Please use the
products within six months after delivery. If you
store the products for a long time (more than six
months), use carefully because the products may
be degraded in the solderability and/or rusty.
Notice (Soldering and Mounting)
Notice (Soldering and Mounting)
Notice (Storage and Operating Condition)
Please confirm solderability and characteristics
for the products regularly.
Temperature: -10 to + 40 degree C
Humidity: 15 to 85% R.H.
1 minute max. in above solvent at +60 degree C max.
(Frequency: 28kHz, Output: 20W/L)
5 minutes max. in above solvent at +60 degree C max.
5 minutes max. in above solvent at +60 degree C max.
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to the storage in a
chemical atmosphere.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
immerses into cleaning solvent at +60
degree C, then dT=30 degree C.
4. Drying
5. Others
4. Others
(1) Total washing time should be within 10 minutes.
(2) Please insure the component is thoroughly
(3) The component may be damaged if it is washed
(4) Please do not apply excess mechanical stress to
(5) Ultrasonic cleaning of the component is acceptable.
(2) Please do not put the products directly on the
(3) Please do not store the products in the places
(4) Please use the products immediately after the
(5) Please do not drop the products to avoid cracking
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to
confirm that stable electrical characteristics are
maintained.
Please be sure to consult with our sales representative
or engineer whenever and prior to using the products.
5 minutes max. by air blow at +80 degree C max.
evaluated in your application circuit.
with alkali cleaning solvent.
the component and lead terminals during soldering.
However, the size of bath, size and thickness of
PCB should be evaluated to confirm stable electrical
characteristics are maintained.
floor without anything under them to avoid damp
places and/or dusty places.
such as: in a damp heated place, in a place where
direct sunlight comes in, in place applying
vibrations.
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under the poor
condition.
of ceramic element.
P16E.pdf
06.9.7