SAM9-L9260 Olimex Ltd., SAM9-L9260 Datasheet - Page 2

• Manufacturer Part Number: SAM9-L9260
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR AT91SAM9260
• Manufacturer: Olimex Ltd.

Specifications of SAM9-L9260

• Processor To Be Evaluated: AT91SAM9260
• Data Bus Width: 16 bit, 32 bit
• Interface Type: RS-232, Ethernet, USB, JTAG
• Dimensions: 100 mm x 80 mm
• Operating Supply Voltage: 5 V
• Silicon Manufacturer: Atmel
• Core Architecture: ARM
• Core Sub-architecture: ARM9
• Silicon Core Number: AT91S
• Silicon Family Name: AT91SAM9xxx
• Kit Contents: Board
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1701512 25R5022

INTRODUCTION:
BOARD FEATURES:
ELECTROSTATIC WARNING:
BOARD USE REQUIREMENTS:
SAM9-L9260 is a low cost development platform with ARM9
microcontroller, 64MB SDRAM and 512MB NAND Flash. The board has
Ethernet 100Mbit controller, USB host, USB device, RS232 and 40 pin
extension port with all unused SAM9260 ports available for add-on boards.
SAM9-L9260 has waste amount of Flash and RAM and runs Linux,
WindowsCE and other RTOS natively. The on-board RTC clock is equipped
with a 3V Li backup battery.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The SAM9-L9260 board is shipped in protective anti-static packaging. The
board must not be subject to high electrostatic potentials. General practice
for working with static sensitive devices should be applied when working
with this board.
Cables:
Hardware: ARM-JTAG, ARM-USB-OCD or other compatible tool if you
Software:
MCU: AT91SAM9260 16/32 bit ARM9™ 200MHz operation
50MHz system (main) clock
standard JTAG connector with ARM 2x10 pin layout for
programming/debugging with ARM-JTAG
64 MB SDRAM
512MB NAND Flash (seen in Linux as silicon drive)
Ethernet 100Mbit connector
USB host and USB device connectors
RS232 interface and drivers
SD/MMC card connector
one user button and one reset button
one power and two status LEDs
on board voltage regulator 3.3V with up to 800mA current
single power supply: 5V DC required
power supply filtering capacitor
18.432 Mhz crystal on socket
extension header
PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
Dimensions: 100 x 80 mm (3.94 x 3.15")
Null modem RS232 female – female to connect with PC COM
port.
1.8 meter USB A-B cable to connect with USB host.
want to program this board with JTAG, usually with linux
installed you can develop without the need for JTAG.
The CD contains Linux 2.6 complete with source and binary in
CD.