LPC-E2294-1MB Olimex Ltd., LPC-E2294-1MB Datasheet - Page 6

• Manufacturer Part Number: LPC-E2294-1MB
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC2294 256KB FLASH 16KB RAM
• Manufacturer: Olimex Ltd.

Specifications of LPC-E2294-1MB

• Processor To Be Evaluated: LPC2294 ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Interface Type: RS-232, Ethernet, USB, CAN, I2C, SPI, UART
• Dimensions: 171 mm x 99 mm
• Operating Supply Voltage: 9 V to 12 V
• Tool Type: Development Kit
• Core Architecture: ARM
• Cpu Core: ARM7TDMI-S
• Silicon Manufacturer: NXP
• Core Sub-architecture: ARM7TDMI
• Silicon Core Number: LPC2xxx
• Silicon Family Name: LPC22xx
• Kit Contents: Board
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1776318 52R3624

SD/MMC Connector
Jumpers
SMD Jumper:
Jumpers
Jumper (JRST)
Jumper (BSL)
Jumper (CAN1_T)
Jumper (CAN1_D)
Jumper (CAN2_T)
Jumper (CAN2_D)
Jumper (CAN3_T)
Jumper (CAN3_D)
Jumper (CAN4_T)
Jumper (CAN4_D)
Jumper (BOOT1)
Jumper (BOOT0)
Jumper (RS232/UEXT)
Jumper (SPI_S/SPI_M)
Jumper (EXT/USB)
Jumper (DBG_E)
SPEED/DUP - KG lan pin connected to DM9000E PIN 60 (#SPEED) or PIN 61(#DUP)
Position
Pin / Name
1 - CD/DAT3/CS
2 - CMD/DI
3 - VSS1
4 - VDD
5 - CLK/SCLK
6 - VSS2
7 - DAT0/DO
8 - DAT1/RES
9 - DAT2/RES
10 - WP1
14 - WP2
13 - CP1
15 - CP2
Description
Disable ICSP programming.
Enable ICSP programming - via USB (virtual COM port)
CAN1 Terminator disable
CAN1 Terminator enable (120 ohm)
CAN1 Driver enable
CAN1 Driver disable
CAN2 Terminator disable
CAN2 Terminator enable (120 ohm)
CAN2 Driver enable
CAN2 Driver disable
CAN3 Terminator disable
CAN3 Terminator enable (120 ohm)
CAN3 Driver enable
CAN3 Driver disable
CAN4 Terminator disable
CAN4 Terminator enable (120 ohm)
CAN4 Driver enable
CAN4 Driver disable
Selects 8-bit memory on CS0 for boot.
Selects 16-bit memory on CS0 for boot.
Selects 32-bit memory on CS0 for boot.
Selects Internal Flash memory.
Port P0.9/RXD1/PWM6/EINT3 (pin 76) connected to UEXT Extension port
Port P0.9/RXD1/PWM6/EINT3 (pin 76) connected to LPC UART1 interface
CS pin on SD/MMC connector is connected to P0.20 / MAT1.3 / SSEL1 / EINT3 (pin 123)
CS pin on SD/MMC connector is connected to P3.24 / CS3 (pin 36)
External power supply (power jack connector )
USB power supply.
Disable JTAG programming.
Enable JTAG programming.
Connected to:
PIN 36 or PIN 123
PIN 122
GROUND
+3.3V
PIN 101
GROUND
PIN 121
+3.3V
+3.3V
PIN 70
GROUND
PIN 60
GROUND
Functionality
P3.24 / CS3 or P0.20 / MAT1.3 / SSEL1 / EINT3
P0.19 / MAT1.2 / MOSI1 / CAP1.2
-
-
P0.17 / CAP1.2 / SCK1 / MAT1.2
-
P0.18 / CAP1.3 / MISO1 / MAT1.3
-
-
P1.24 / TRACECLK
-
P1.25 / EXTIN0
P1.15 / HTXD