AVR-P40N-8535-8MHz Olimex Ltd., AVR-P40N-8535-8MHz Datasheet - Page 3

• Manufacturer Part Number: AVR-P40N-8535-8MHz
• Description: MCU, MPU & DSP Development Tools PROTOTYPE BRD FOR STK200 10PIN
• Manufacturer: Olimex Ltd.
• Type: Development Boardr

Specifications of AVR-P40N-8535-8MHz

• Processor To Be Evaluated: AVR-PG1, AVR-PG2
• Data Bus Width: 8 bit
• Interface Type: RS-232
• Dimensions: 100 mm x 80 mm
• Operating Supply Voltage: 3.3 V, 5 V
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Kit Contents: Board
• Features: RS232 Tx, Rx Interface, DIL40 Microcontroller Socket
• Rohs Compliant: Yes
• Mcu Supported Families: STKxxx
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1701518 25R4414 AVR-P40-8MHZ

ELECTROSTATIC WARNING
BOARD USE REQUIREMENTS
The AVR-P40-8535 board is shipped in protective anti-static packaging. The board
must not be subject to high electrostatic potentials. General practice for working
with static sensitive devices should be applied when working with this board.
Cables: The cable you will need depends on the programmer/debugger you use. If
you use AVR-PG1, or AVR-JTAG-L, you will need RS232 cable, if you use
PG2, you will need LPT cable, if you use AVR-ISP500, AVR-ISP500-TINY,
ISP500-ISO, or
Hardware: Programmer/Debugger – one of the Olimex AVR Programmers: AVR-
PG1, AVR-PG2, AVR-ISP500, AVR-ISP500-TINY, AVR-ISP500-ISO, AVR-JTAG-L,
AVR-USB-JTAG.
AVR-USB-JTAG
Page3
you will need 1.8 meter USB A-B cable.
AVR-
AVR-