A165-TRM-1 Omron, A165-TRM-1 Datasheet - Page 21

• Manufacturer Part Number: A165-TRM-1
• Description: SWITCH PB ROUND MOM SPDT RED
• Manufacturer: Omron
• Series: A16r
• Type: Standardr

Specifications of A165-TRM-1

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 5A @ 125VAC
• Actuator Type: Round Button
• Mounting Type: Panel Mount
• Termination Style: Solder, Quick Connect - .110" (2.8mm)
• Contact Form: SPDT
• Contact Rating: 5 Amps at 125 Volts
• Actuator: Round
• Mounting Style: Snap In
• Illumination: Not Illuminated
• Body Shape: Square
• Dielectric Strength: 2000 Volts
• Features: Terminal layout simplifies common wiring
• Insulation Resistance: 100 MOhms
• Mounting Angle: Straight
• Operating Force: 4.91 N
• Water / Moisture Rating: IP65
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: A165TRM1; Z1326

Dimensions
Panel Cutouts
Solder Terminals and Screw-less Clamp Connectors
Terminal Arrangement
Models without Reduced-voltage Lighting
Solder Terminals
Note:• Make sure the thickness of the mounting panel is between 0.5 and 3.2
Rectangular A16@-@J/M16@-@J
Dimensions of
Terminal Holes
16
• If the panel is to be finished with coating, etc., make sure that the panel
• Figures in parentheses are for Screw-less Clamp Connectors.
+0.2
1.5
2.8
0
mm. If, however, a Switch Guard or Dust Cover is used, the thickness
of the mounting panel must be between 0.5 and 2 mm.
meets the specified dimensions after coating.
dia.
(Top View)
(25 min.)
24 min.
2.6
0.9
Lamp terminal
7.4
Lighted SPDT Switches
(33 min.)
19 min.
12.2
18
Note: The L+ is not shown on the Switch.
Square A16@-A/M16@-A
Round A16@-T/M16@-T
16
+0.2
0
Terminal Arrangement
dia.
(Top View)
(Bottom View)
(25 min.)
19 min.
(Non-lighted Pushbutton Switches are also provided with lamp terminals.)
(33 min.)
COM
SW1
19 min.
NC
NO
L-
PCB Terminals
1.5
2.8
Note:• Ensure that the variation in the distance between the centers of
Dimensions of
Terminal Holes
Rectangular A16@-J/M16@-J
9.1 ± 0.05
14.7 ± 0.05 dia.
Lamp terminal
• Make sure the thickness of the mounting panel is between 0.5 and 3.2
• If the panel is to be finished with coating, etc., make sure that the panel
neighboring mounting holes is less than ±0.1 mm.
mm. If, however, a Switch Guard or Dust Cover is used, the thickness
of the mounting panel must be between 0.5 and 2 mm.
meets the specified dimensions after coating.
2.6
0.9
16
+0.2
0
5.1 ± 0.05
dia.
(Top View)
7.4
24 min.
Lighted DPDT Switches
12.2
18
Note: The L+ is not shown on the Switch.
24 min.
Terminal Arrangement
Square A16@-A/M16@-A
Round A16@-T/M16@-T
(Bottom View)
16
+0.2
0
dia.
(Top View)
(25 min.)
19 min.
COM
SW1
NC
NO
L-
COM
SW2
NC
NO
(Unit: mm)
(33 min.)
19 min.
A16
21