XBP09-DPUIT-156 Digi International, XBP09-DPUIT-156 Datasheet - Page 56

• Manufacturer Part Number: XBP09-DPUIT-156
• Description: MODULE XBEE PRO W/U.FL
• Manufacturer: Digi International
• Series: XBEE-PRO™r

Specifications of XBP09-DPUIT-156

• Frequency: 902MHz ~ 928MHz
• Data Rate - Maximum: 156kbps
• Modulation Or Protocol: FHSS
• Applications: ISM
• Power - Output: 17dBm (50mW)
• Sensitivity: -100dBm
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Receiving: 80mA
• Current - Transmitting: 210mA
• Data Interface: PCB, Through Hole
• Antenna Connector: U.FL
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1168

XBee‐PRO® 900 RF Modules
Remote Command Response
Frame Type: 0x97
If a module receives a remote command response RF data frame in response to a Remote AT
Command Request, the module will send a Remote AT Command Response message out the UART.
Some commands may send back multiple frames--for example, Node Discover (ND) command.
Example: If a remote command is sent to a remote device with 64-bit address 0x0013A200
40522BAA to query the SL command, and if the frame ID=0x55, the response would look like the
above example.
A
P
I
P
a
c
k
e
t
© 2009 Digi International, Inc.
Start Delimiter
Length
Frame-specific Data
Checksum
Frame Fields
Frame Type
Frame ID
64-bit Source
(remote) Address
Reserved
AT Commands
Command Status
Command Data
Offset Example
LSB 12 0xAA
MSB 1 0x00
MSB 5 0x00
LSB 2 0x13
10 0x52
13 0xFF
14 0xFE
15 0x53
16 0x4C
17 0x00
18 0x40
19 0x52
20 0x2B
21 0xAA
22 0xF4
11 0x2B
0 0x7E
3 0x97
4 0x55
6 0x13
7 0xA2
8 0x00
9 0x40
Number of bytes between the length and the checksum
This is the same value passed in to the request.
The address of the remote radio returning this response.
Reserved
Name of the command
0 = OK
1 = ERROR
2 = Invalid Command
3 = Invalid Parameter
The value of the required register
0xFF - the 8 bit sum of bytes from offset 3 to this byte.
Description
56