ENW-C9A02A3E Panasonic - ECG, ENW-C9A02A3E Datasheet - Page 17

• Manufacturer Part Number: ENW-C9A02A3E
• Description: MODULE ZIGBEE 2.4GHZ EMBER W/ANT
• Manufacturer: Panasonic - ECG
• Series: PAN4570r

Specifications of ENW-C9A02A3E

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3dBm
• Sensitivity: -97dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 37.5mA
• Current - Transmitting: 41.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 5kB SRAM
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Rate - Maximum: -
• Other names: ENWC9A02A3E; P13685TR; PAN4570-ANT

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN4570
18 LABELING DRAWING
19 MECHANICAL REQUIREMENTS
HIGH FREQUENCY PRODUCTS DIVISION
Kennzeichnung des Moduls durch Label
Mechanische Anforderungen
PANASONIC ELECTRONIC DEVICES
Imprint
Aufdruck
ENWCZA0xyzE
Date Code
02
01ES
0000001
FCC ID: T7VEM250A
2D-Barcode
No.
1
2
Item
Punkt
Solderability
Lötfähigkeit
Resistance to
soldering heat
(EUROPE) GmbH
Module Business
MODEM FOR IEEE802.15.4 (ZIGBEE)
26,5 mm
“ZigBee” Modem“ (IEEE802.15.4)
Description
Beschreibung
This is the ordering code from Panasonic, details could be found under chapter 25.
Production Date Code in the format YYMMDD, e.g. 060602
Indication for software revision for our final test, customer are able to flash there own
software.
Indication for the hardware revision, ES indicates the ES status, will be removed after MP
ready.
Indication for the serial number.
FCC ID, listed under
Information in the 2D-Barcode are the serial number [7 signs], the ENW-Part-Number [11
signs], identifier for the software release [2 signs], the identifier for the hardware release [2
signs] and the production date code in the format Year-Month-Day [6 signs], separated by
a semicolon.
The IEEE802.15.4 MAC Address [12 characters] are stored in the Ember IC EM250,
therefore it could not be on the label, but must be stored in the final test report to have a
reference betweeen MAC address and serial number.
Pin 1 marking
PRODUCT SPECIFICATION
Limit
Grenzwerte
More than 75% of the soldering area shall be
coated by solder
Mehr als 75% der Lötfläche soll mit Lötpaste
bedeckt sein.
It shall be satisfied electrical requirements and
not be mechanical damage
PANASONIC’S CODE
ENWCZA0xyzE
Produktspezifikation
FCC Modular Approval
APPROVED
genehmigt
No.
DS-4570-2400-102
PAGE
Seite
DATE
Datum
CHECKED
Condition
Bedingung
Reflow soldering with
recommendable temperature
profile
Please see chapter 15.2
geprüft
16.03.2007
17 of 30
DESIGNED
erstellt
REV.
07