XBP09-XCUIT-009 Digi International, XBP09-XCUIT-009 Datasheet - Page 34

• Manufacturer Part Number: XBP09-XCUIT-009
• Description: XBEE-PRO XSC -100MW 9.6KBPS
• Manufacturer: Digi International
• Series: XBEE-PRO™r

Specifications of XBP09-XCUIT-009

• Frequency: 910MHz ~ 918MHz
• Data Rate - Maximum: 9.6kbps
• Modulation Or Protocol: FHSS
• Power - Output: 20dBm (100mW)
• Sensitivity: -106dBm
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Receiving: 65mA
• Current - Transmitting: 265mA
• Data Interface: PCB, Through Hole
• Antenna Connector: U.FL
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1132; Q4197953; XBP09-XCUIT-009

XBee‐PRO® XSC OEM RF Modules
Command Summary
AT Command: ATRT
Binary Command: 0x16 (22 decimal)
Parameter Range:0 – 2
Default Parameter Value: 0
Number of bytes returned: 1
Command Summary
AT Command: ATSB
Binary Command: 0x36 (54 decimal)
Parameter Range:0 – 1
Default Parameter Value: 0
Number of bytes returned: 1
Command Summary
AT Command: ATSH
Binary Command: 0x25 (37 decimal)
Parameter Range:0 – 0xFFFF [read-only]
Number of bytes returned: 2
Related Commands: SL (Serial Number
Low)
Command Summary
AT Command: ATSH
Binary Command: 0x26 (38 decimal)
Parameter Range:0 – 0xFFFF [read-only]
Number of bytes returned: 2
Related Commands: SH (Serial Number
High)
Parameter
Parameter
Value
Value
0
1
2
0
1
Enable Binary Programming
Enable
RT (DI2 Configuration) Command
SB (Stop Bits) Command
SH (Serial Number High) Command
SL (Serial Number Low) Command
Configuration
Configuration
1 stop bits
2 stop bits
© 2010 Digi International, Inc.
disabled
Flow Control
<Diagnostics> Read the serial number
high word of the module.
<Diagnostics> Read the serial number
low word of the module.
Description
<Serial Interfacing> RT
command is used to
dictate the behavior of
the
DI2/RTS/CMD line. RT
Command must be
issued to enable RTS
flow control
or binary
programming.
Description
SB Command is used to
set/read the number of
stop bits in the data
packets.
Description
Description
34