XB24-BCIT-004 Digi International/Maxstream, XB24-BCIT-004 Datasheet - Page 78

• Manufacturer Part Number: XB24-BCIT-004
• Description: MODULE 802.15.4 SER 2 CHIP ANT
• Manufacturer: Digi International/Maxstream
• Series: XBee™r

Specifications of XB24-BCIT-004

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: Home/Building Automation, Industrial Control, ZigBee™
• Power - Output: 2 mW (3 dBm)
• Sensitivity: -96dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 38mA
• Current - Transmitting: 35mA
• Data Interface: PCB, Through Hole
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -

Sleep Commands
XBee ZNet 2.5/XBee‐PRO ZNet 2.5 ZigBee OEM RF Modules v1.x4x
Table 7‐010. Sleep Commands
AT
Command
SM
SN
SP
ST
SO
Command
Name and Description
Sleep Mode Sets the sleep mode on the RF module
Number of Sleep Periods. Sets the number of sleep periods to not assert the On/Sleep
pin on wakeup if no RF data is waiting for the end device. This command allows a host
application to sleep for an extended time if no RF data is present
Sleep Period. This value determines how long the end device will sleep at a time, up to
28 seconds. (The sleep time can effectively be extended past 28 seconds using the SN
command.) On the parent, this value determines how long the parent will buffer a
message for the sleeping end device. It should be set at least equal to the longest SP
time of any child end device.
Time Before Sleep Sets the time before sleep timer on an end device.The timer is reset
each time serial or RF data is received. Once the timer expires, an end device may enter
low power operation. Applicable for cyclic sleep end devices only.
Sleep Options. Configure options for sleep. Unused option bits should be set to 0.
Sleep options include:
0x02 - Always wake for ST time
0x04 - Sleep entire SN * SP time
Sleep options should not be used for most applications. See Sleep Mode chapter for
more information.
© 2008 Digi International, Inc.
Node
Type
RE
RE
CRE
RE
E
1
Parameter Range
0-Sleep disabled
1-Pin sleep enabled
4-Cyclic sleep enabled
Note: When SM=0, the
device operates as a
router. When SM
changes to a non-zero
value, the router leaves
the network and rejoins
as an end device. Only
end devices can sleep
1 - 0xFFFF
0x20 - 0xAF0 x 10ms
(Quarter second
resolution)
1 - 0xFFFE (x 1ms)
0 - 0xFF
Default
0
1
0x20
0x1388 (5
seconds)
0
77