TEF6606T/V5,512 NXP Semiconductors, TEF6606T/V5,512 Datasheet - Page 20

• Manufacturer Part Number: TEF6606T/V5,512
• Description: IC TUNER CAR RADIO AM/FM 32SOIC
• Manufacturer: NXP Semiconductors

Specifications of TEF6606T/V5,512

• Modulation Or Protocol: AM, FM
• Applications: AM/FM Radio Receiver
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Voltage - Supply: 8.5V
• Package / Case: 32-SOIC (0.300", 7.50mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Frequency: -
• Operating Temperature: -
• Sensitivity: -
• Memory Size: -
• Data Rate - Maximum: -
• Current - Receiving: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 935288263512

NXP Semiconductors
LPC3152_3154
Preliminary data sheet
6.6 External Bus Interface (EBI)
6.7 Internal ROM Memory
The EBI module acts as multiplexer with arbitration between the NAND flash and the
SDRAM/SRAM memory modules connected externally through the MPMC.
The main purpose for using the EBI module is to save external pins. However only data
and address pins are multiplexed. Control signals towards and from the external memory
devices are not multiplexed.
Table 8.
The internal ROM memory is used to store the boot code of the LPC3152/3154. After a
reset, the ARM processor will start its code execution from this memory.
The LPC3154 ROM memory has the following features:
The LPC3152 ROM memory has the following features:
Module
External SRAM0
External SRAM1
External SDRAM0 0x3000 0000
•
•
•
•
•
•
•
•
•
•
Supports secure booting from SPI flash, NAND flash, SD/SDHC/MMC cards, UART,
and USB (DFU class) interfaces.
Supports SHA1 hash checking on the boot image.
Supports un-secure boot from UART and USB (DFU class) interfaces during
development. Once the AES key is programmed in the OTP, only secure boot is
allowed through UART and USB.
Supports secure booting from managed NAND devices such as moviNAND, iNAND,
eMMC-NAND and eSD-NAND using SD/MMC boot mode.
Contains pre-defined MMU table (16 kB) for simple systems.
Supports non-secure booting from SPI flash, NAND flash, SD/SDHC/MMC cards,
UART, and USB (DFU class) interfaces.
Supports option to perform CRC32 checking on the boot image.
Supports non-secure booting from UART and USB (DFU class) interfaces during
development.
Supports non-secure booting from managed NAND devices such as moviNAND,
iNAND, eMMC-NAND and eSD-NAND using SD/MMC boot mode.
Contains pre-defined MMU table (16 kB) for simple systems.
Memory map of the external SRAM/SDRAM memory modules
All information provided in this document is subject to legal disclaimers.
Maximum address space
0x2000 0000
0x2000 0000
0x2002 0000
0x2002 0000
Rev. 0.12 — 27 May 2010
0x2000 FFFF
0x2001 FFFF
0x2002 FFFF
0x2003 FFFF
0x37FF FFFF
Data width
8 bit
16 bit
8 bit
16 bit
16 bit
LPC3152/3154
© NXP B.V. 2010. All rights reserved.
64 kB
128 kB
64 kB
128 kB
128 MB
Device size
20 of 88