XB24-BPDK Digi International/Maxstream, XB24-BPDK Datasheet - Page 52

no-image

XB24-BPDK

Manufacturer Part Number
XB24-BPDK
Description
KIT DEVELOPMENT XBEE SERIES 2
Manufacturer
Digi International/Maxstream
Series
XBee™r
Type
802.15.4/Zigbeer
Datasheet

Specifications of XB24-BPDK

Frequency
2.4GHz
For Use With/related Products
XBee™ Series 2 Modules
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
XBee ZNet 2.5/XBee‐PRO ZNet 2.5 ZigBee OEM RF Modules v1.x4x 
Button presses may be simulated in software using the ATCB command. ATCB should be issued
with a parameter set to the number of button presses to execute. (i.e. sending ATCB1 will execute
the action(s) associated with a single button press.)
The node identification frame is similar to the node discovery response frame – it contains the
device’s address, node identifier string (NI command), and other relevant data. All API devices
that receive the node identification frame send it out their Uart as an API Node Identification
Indicator frame (0x95).
5.4.2. Associate LED
The Associate pin (pin 15) can provide indication of the device’s network status and diagnostics
information. To take advantage of these indications, an LED can be connected to the Associate pin
as shown in the figure above. The Associate LED functionality is enabled by setting the D5
command to 1 (enabled by default). If enabled, the Associate pin is configured as an output and
will behave as described in the following sections.
Joined Indication
The Associate pin indicates the network status of a device. If the module is not joined to a
network, the Associate pin is set high. Once the module successfully joins a network, the
Associate pin blinks at a regular time interval. This is shown in the following figure.
© 2008 Digi International, Inc.
     51

Related parts for XB24-BPDK