BR-EVAL2.0 BlueRadios Inc, BR-EVAL2.0 Datasheet - Page 81

• Manufacturer Part Number: BR-EVAL2.0
• Description: EVAL KIT BLUETOOTH VER2.0
• Manufacturer: BlueRadios Inc
• Type: Bluetooth V 2.0r

Specifications of BR-EVAL2.0

• Frequency: 2.4GHz
• For Use With/related Products: Bluetooth
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 822-1001

5
Note: Apply 3.3Vdc on PIO(4) for >2 sec. during initial power up will revert all user definable settings to the
factory defaults shown below. The other option is to use the software command ATFRST. The only exception for
these two options is the name of device (friendly name) the BlueRadios and PIN/Passkey will not change back if
you had changed this already. Allow approximately 5 seconds for the radio to reconfigure. On the BlueRadios
evaluation boards we included a push button for PIO(4) factory reset which can be held down for 1 second while
power is applied to the radio.
7173 S. Havana Street, Suite 600
Miscellaneous Items:
BlueRadios Factory Default Settings
Bypass Hardware Factory Reset = Enabled
Escape Character = ‘+’
Max Connection Number = 1
Radio Name = “BlueRadios”
Country Code = North America and Europe
Module Type = BlueRadios ATMP
Boot Mode = Virtual Machine (VM) Mode
Service Name = “COM0” (Ch0), “COM1” (Ch1), “COM2” (Ch2), “COM3” (Ch3)
PIN/Passkey = “default”
COD = 00000000
UART Setting = 9600 Baud, 8 Data Bits, No Parity, 1 Stop Bit (8,N,1)
Hardware flow control RTS/CTS = Enabled
Page Scan Interval = 1024 (640ms)
Page Scan Window = 512 (320ms)
Inquiry Scan Interval = 1024 (640ms)
PIO Directions (Point to Point) = 6-In, 7-In
PIO Directions (Multipoint) = 6-Out, 7-Out
Response Type = Long Response
Security = Disabled (If the security flag is enabled a factory reset of parameters does not disable security)
Security Level = Link Level, if security flag is enabled services are provided only with PIN exchange.
Automatic SCO Connect = Disabled
Minor Filter = Disabled
Default Boot Mode = Slave
Radio Status = 1,0 (Slave Disconnected)
Default Comm Mode = Data
Unconnected UART Mode = Allow Data to Pass While Unconnected
Bluetooth Service Profile = Serial Port Profile (SPP)
Lock User Settings = Disabled
PIO(5) LED Rate = 1000ms
Inquiry Timeout = 16s
Master Connect Request Timeout = 40s
PIN Lock Mode = ATOP Disable
Deep Sleep Mode = Never Go Into Deep Sleep
Pairing Timeout = 30 seconds
Class1 Radio Max Transmit Power = 15dbm. Class2 module will still have a max of 4dbm output
performance even though you can set it to 15.
Link Supervisory Timeout = ~4s
Over the air RF guaranteed data packet retries is set for indefinite.
Inquiry Scan Window = 512 (320ms)
www.BlueRadios.com
•
Englewood, CO 80112
Copyright © 2002-2008
BlueRadios, Inc.
Page 81 of 103
•
Tel [phone]
BR-AT_COMMANDS-100 Rev. 3.6.2.1.4.0
•
[e-mail]