ATAVRRZ600 Atmel, ATAVRRZ600 Datasheet - Page 12
![AVR TXRX EVAL KIT](/photos/14/8/140867/atavrrz600_sml.jpg)
ATAVRRZ600
Manufacturer Part Number
ATAVRRZ600
Description
AVR TXRX EVAL KIT
Manufacturer
Atmel
Series
AVR®r
Type
Transceiver, Microcontrollerr
Specifications of ATAVRRZ600
Design Resources
RZ600 Radio Schematics RZ600 USB Adapter Schematics
Frequency
700MHz, 800MHz, 900MHz, 2.4GHz
Wireless Frequency
700 MHz to 2.4 GHz
Interface Type
USB
Antenna
SMA
For Use With/related Products
AT86RF
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
ATRZ600
ATRZ600
ATRZ600
4.4 Cables
5 Connecting Radio Frequency Board to a Custom Board
5.1 Default Supported Kits
Table 5-1. Plug and Play Kits
5.2 Squid Cable
Kit Name
STK600
- Any ATxmega device
- ATmega164/324/644/1284P
STK500
- ATmega164/324/644/1284P
XPLAIN
EVK1104
EVK1105
12
AVR600
The antennas should be screwed onto the respective radio frequency board and
gently tightened.
There are two different cable types available in the RZ600 kit
• Squid Cable:
• Single Wire:
The radio frequency boards found as part of this kit can be used stand alone as well
as in conjunction with the processor board. Table 4-1 shows the pinout of the
standardized 10-pin bus that is defined between the two unit. However, it is possible
to add the radio frequency board to any routing as long as the required signals are
available. This is possible due to the radio frequency board being able to be mounted
on the squid cable included in this kit. With this squid cable it is possible to route all
10 signals down onto a custom hardware. The reminder of this chapter shows a few
examples on how to wire these signals.
Besides from being used on the processor boards the radio frequency board can be
attached to wide range of Atmel evaluation and starter kits. The following kits are
supported directly. If you do not find your preferred kit here, please take a look at
section 5.2.
There are two squid cables (10pin male header to single wires) included in the kit.
The intended use of this special cable assembly is to plug the radio frequency board
onto it, and connect the ten single wires to any hardware platform that does not have
the standard auxiliary connector available.
Table 5-2. Squid Cable Pinout
Comment
Any of the digital ports can be used.
Any of the digital ports can be used.
Squid Cable.
Squid Cable.
Pin 1 (Brown): Reset Pin 2 (Red): Miscellaneous
PIN PIN
8293A-AVR-03/10