AT86RF211DB-868LT Atmel, AT86RF211DB-868LT Datasheet - Page 4

• Manufacturer Part Number: AT86RF211DB-868LT
• Description: BOARD DAUGHTER AT86RF211/868MHZ
• Manufacturer: Atmel

Specifications of AT86RF211DB-868LT

• Module/board Type: Daughter Board
• For Use With/related Products: AT86RF211 @ 866MHz
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: AT86RF211-DB868107; AT86RF211DB868107; AT86RF211DB868107; AT86RF211DB868LT

Notes:
4
1. 8 ms is a typical value that depends on the crystal's specifications (the user does not have to care about that: oscillator set-
2. Full correct message means: Header correct (mandatory) + Address matches (if any).
3. WL2 must be > 2 expected message duration (to make sure to catch it).
4. When a correct message has been received, the scan is stopped until the Data register WUD is read (it can be a simple
5. At the other side, the device that sends the wake-up message must do it during at least: [(1 ms + WPER + 8 ms + WL1) +
6. The time parameters can be measured on the production bench and "calibrated" by software (the ±20% dispersion is
AT86RF211 (TRX01)
tling is automatically detected by AT86RF211).
access if the Data field is not used).
20%] to make sure that it will occur at least one time during the reception window (all time parameters have a tolerance of
20%).
reduced and all the devices have the same timeslots).
2186A–WIRE–08/02
±