MCIMX31LCVMN4C Freescale Semiconductor, MCIMX31LCVMN4C Datasheet - Page 90

• Manufacturer Part Number: MCIMX31LCVMN4C
• Description: IC MPU MAP I.MX31L 473-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: i.MX31r

Specifications of MCIMX31LCVMN4C

• Core Processor: ARM11
• Core Size: 32-Bit
• Speed: 400MHz
• Connectivity: 1-Wire, ATA, EBI/EMI, FIR, I²C, MMC/SD, PCMCIA, SIM, SPI, SSI, UART/USART, USB, USB OTG
• Peripherals: DMA, LCD, POR, PWM, WDT
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.22 V ~ 3.3 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 473-MAPBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of I /o: -
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

1
2
Electrical Characteristics
4.3.22
This section describes the electrical information of SSI. Note the following pertaining to timing
information:
4.3.22.1 SSI Transmitter Timing with Internal Clock
Figure 80
90
SJ11
SJ12
SJ13
On cases where SDMA TAP is put in the chain, the max TCK frequency is limited by max ratio of 1:8 of SDMA core frequency
to TCK limitation. This implies max frequency of 8.25 MHz (or 121.2 ns) for 66 MHz IPG clock.
V
ID
M -
•
•
•
•
mid point voltage
TCK low to TDO high impedance
TRST assert time
TRST set-up time to TCK low
All the timings for the SSI are given for a non-inverted serial clock polarity (TSCKP/RSCKP = 0)
and a non-inverted frame sync (TFSI/RFSI = 0). If the polarity of the clock and/or the frame sync
have been inverted, all the timing remains valid by inverting the clock signal STCK/SRCK and/or
the frame sync STFS/SRFS shown in the tables and in the figures.
All timings are on AUDMUX signals when SSI is being used for data transfer.
“Tx” and “Rx” refer to the Transmit and Receive sections of the SSI.
For internal Frame Sync operation using external clock, the FS timing will be same as that of Tx
Data (for example, during AC97 mode of operation).
depicts the SSI transmitter timing with internal clock, and
SSI Electrical Specifications
Table 56. SJC Timing Parameters (continued)
MCIMX31C/MCIMX31LC Technical Data, Rev. 4.3
Parameter
Table 57
Min
100
40
—
All Frequencies
lists the timing parameters.
Freescale Semiconductor
Max
44
—
—
Unit
ns
ns
ns