129-0701-302 Emerson Network Power, 129-0701-302 Datasheet - Page 245

• Manufacturer Part Number: 129-0701-302
• Description: CONN JACK TEST SHIELD RIGHT ANGL
• Manufacturer: Emerson Network Power
• Type: Tip Jackr

Specifications of 129-0701-302

• Gender: Female
• Plug/mating Plug Diameter: Standard
• Mounting Type: Through Hole, Horizontal
• Termination: Solder
• Insulation: Non-Insulated
• Contact Finish: Gold
• Contact Material: Beryllium Copper
• Body Material: TFE Fluorocarbon
• Operating Temperature: -65°C ~ 85°C
• Color: Silver
• Contact Plating: Gold
• Equipment Type: Shielded Test Jack
• Voltage Rating: 2000 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1290701302; J571

Solder Type Straight Cable Termination
for End Launch
Solder Type Straight Cable Termination
for End Launch Surface Mount
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
1. Identify connector parts (2-piece parts).
2. Strip cable to dimensions shown. Do not nick
3. Flare braid and slide cable into body mak-
4. Arrange braid uniformly around crimp sleeve.
RG-405/U (.086 Semi-Rigid)
RG-402/U (.141 Semi-Rigid)
1. Identify connector parts. (1 piece part)
2. Strip cable to dimensions shown. Do not
3. Insert cable into body making sure cable
RG-178/U, 196
braid or center conductor. A wire stripper of
correct size is recommended for this step.
Twist stranded center conductor into tight
bundle and tine. Slide crimp sleeve onto
cable as shown.
ing certain that the cable dielectric is flush
with the end of the connector body.
Slide crimp sleeve over braid and crimp
securely using recommended crimp tool.
nick braid or center conductor.
is bottomed against shoulder body. Solder
body to cable. Use a minimum amount
of heat to minimize cable dielectric
movement.
GROUP
CABLE
CABLE GROUP
.250 Semi-Rigid
142-0002-821
PART
NO.
142-0093-801/806
142-0094-801/806
142-0096-801/806
PART NO.
.105 (2.67)
CRIMP
HEX
245