129-0701-302 Emerson Network Power, 129-0701-302 Datasheet - Page 216

• Manufacturer Part Number: 129-0701-302
• Description: CONN JACK TEST SHIELD RIGHT ANGL
• Manufacturer: Emerson Network Power
• Type: Tip Jackr

Specifications of 129-0701-302

• Gender: Female
• Plug/mating Plug Diameter: Standard
• Mounting Type: Through Hole, Horizontal
• Termination: Solder
• Insulation: Non-Insulated
• Contact Finish: Gold
• Contact Material: Beryllium Copper
• Body Material: TFE Fluorocarbon
• Operating Temperature: -65°C ~ 85°C
• Color: Silver
• Contact Plating: Gold
• Equipment Type: Shielded Test Jack
• Voltage Rating: 2000 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1290701302; J571

216
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
MCX Crimp Type Straight
Connectors for Flexible Cable
Connectivity Solutions
1. Identify connector parts. (3 piece parts—except bulkhead)
2. Strip cable to dimensions shown. Do not nick braid or center conductor. Tin center conductor if
3. Assemble contact onto cable as shown.
4. Flair braid and slide body assembly over contact and under braid. Then seat body assembly firmly
contact is to be solder attached. Do not tin center conductor if contact is to be crimp attached. Slide
heat shrink (as applicable) and crimp sleeve onto jacket of cable.
Solder attachment. Solder contact to center conductor through solder hole using .020 (0.51)
diameter solder. Use a minimum of solder for a good joint.
Crimp attachment. Crimp contact to center conductor using a miniature 8 indent tool 140-0000-970
with positioner 140-0000-971. Crimp location should be centered between end of contact and cross
hole. Crimp attachment to solid center conductor cable is not recommended.
onto contact. (RG-178 is non-captivated, RG-316 incorporates snap-fit captivation.) The cable may
have to be held in a clamping fixture. Arrange braid uniformly around crimp stem. Slide crimp sleeve
forward and crimp using recommended crimp tool. Slide heat shrink forward and shrink
(as applicable).
Tel: [phone]
•
Fax: [phone]
•
RG-316/U, 161, 174, 188
RG-316/U, 161, 174, 188
RG-316/U, 161, 174, 188
www.EmersonNetworkPower.com/connectivity
RG-316 DS, 188 DS
RG-316 DS, 188 DS
RG-316 DS, 188 DS
RG-316 DS, 188 DS
RG-316/U, 188, 174
CABLE GROUP
RG-316/U, 161,
RG-178/U, 196
RG-179/U, 187
RG-178/U, 196
RG-178/U, 196
RG-316 DS,
RG-178/U,
174, 188
188 DS
196
133-3302-001/006
133-3302-401/406
133-3303-001/006
133-3303-401/406
133-3304-001/006
133-3304-401/406
133-3402-001/006
133-3403-001/006
133-3404-001/006
133-3433-001/006
133-5302-401/406
133-5303-401/406
133-5304-401/406
133-5402-001/006
133-5403-001/006
133-5404-001/006
133-9403-001
133-9404-001
PART NO.
CRIMP HEX
.105 (2.67)
.105 (2.67)
.128 (3.25)
.128 (3.25)
.151 (3.83)
.151 (3.83)
.105 (2.67)
.128 (3.25)
.151 (3.83)
.105 (2.67)
.128 (3.25)
.151 (3.83)
.105 (2.67)
.128 (3.25)
.151 (3.83)
.128 (3.25)
.151 (3.83)
128 (3.25)