MT5600BA-V92-NAM Multi-Tech Systems, MT5600BA-V92-NAM Datasheet - Page 9

• Manufacturer Part Number: MT5600BA-V92-NAM
• Description: MODEM V.92 WORLD DATA/FAX LEASE
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® IIr

Specifications of MT5600BA-V92-NAM

• Data Format: V.92
• Interface: RS-232
• Voltage - Supply: 9 V ~ 12 V
• Mounting Type: Desktop
• Package / Case: 9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1018

Step 2 - Install the Modem Driver
If you use Windows 2000 or newer, you must install the modem driver. The drivers are installed easily
since Windows supports Plug-and-Play.
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
Connect the Phone to the Modem (Optional)
Connect the Modem to the AC Power Outlet
Power-On Test
Installing the Modem Driver
For voice-only calls, plug a telephone into the modem’s PHONE jack.
Plug the power transformer into an AC power outlet or power strip. Plug the power transformer’s
cable into the POWER jack on the modem.
Note:
voids the warranty and can damage the modem.
Test the modem by turning it on (a power switch is located on the front panel). When you apply
power, the modem performs a diagnostic self-test, indicated by the TM indicator lighting for a few
seconds, after which the LCD should light. If this does not happen, check that the power switch is
on, the power transformer is solidly connected, and the AC outlet is live. If these measures do not
work, see the “Troubleshooting” chapter.
1.
2.
3.
4.
5.
With your computer turned off, ensure that your modem is connected properly, and then turn
On the Found New Hardware Wizard screen, check Search for the best driver in these
Insert the MultiModem product CD into your CD-ROM drive, when the MultiModem main
On the Found New Hardware Wizard screen, click on Search for the best driver in these
Click Finish to exit.
on your computer. Upon booting up the computer should detect the modem and open
Welcome to the Found New Hardware Wizard screen. On this screen, select Install from
a list or specific location. Click Next.
locations and Install from a specific location. Do Not click Next at this point.
screen appears, click Exit. Now, click Next on the Found New Hardware screen.
locations and Search removable media. Click Next. Windows installs the modem driver.
Use only the power transformer supplied with the modem. Use of any other transformer
Chapter 2 – Installation
9