MT5600BA-V92-NAM Multi-Tech Systems, MT5600BA-V92-NAM Datasheet - Page 27

• Manufacturer Part Number: MT5600BA-V92-NAM
• Description: MODEM V.92 WORLD DATA/FAX LEASE
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® IIr

Specifications of MT5600BA-V92-NAM

• Data Format: V.92
• Interface: RS-232
• Voltage - Supply: 9 V ~ 12 V
• Mounting Type: Desktop
• Package / Case: 9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1018

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
Remote Configuration Options
The following LCDs are used to configure remote configuration options. For more information about
remote configuration, see Chapter 5, “Remote Configuration.”
Diagnostic Options
Use the following LCDs to turn loopback tests on and off.
Phone Number Memory Options
Use the following LCDs to list, enter, and dial stored phone numbers. Up to four phone numbers can
be stored. The number in memory location 0 is used for DTR dialing, if DTR dialing is enabled.
Note:
button. To go to the previous LCD, press the
Only 16 characters can be displayed at a time. To display characters 17–30, press the
Use the
Press the
PROGRESS LCD appears. To stop the test, press the
Press the
PROGRESS LCD appears. To stop the test, press the
as the &T3 command.
Press the
PROGRESS LCD appears. To stop the test, press the
as the &T6 command.
Note:
Commands. The LCD option to run these tests has been temporarily removed.
Press the
location.
Use to store up to four phone numbers in memory locations 0–3. Each number can have up
to 30 characters. To scroll through a list of digits and characters, press the
buttons. To go to the next position, press the
saving, press the
Same as the &Z= commands.
Press the
commands.
ENABLE/DISABLE R.C
REMOTE CONFIG. PASSWORD
Use to enter the remote configuration password. To scroll through a list of digits and
characters, press the
To back up or to exit without saving, press the
password, press the Enter button.
ANALOG LOOPBACK
DIGITAL LOOPBACK
REMOTE DIGITAL LOOPBACK
LIST PHONE NUMBERS
ENTER PHONE NUMBERS
DIAL STORED NUMBERS
Digital Loopback and Remote Digital Loopback tests must be performed using AT
and Enter buttons to turn remote configuration on or off.
and Enter buttons to start the analog loopback test. The TEST IN
and Enter buttons to start the local digital loopback test. The TEST IN
button several times to display the phone number stored in each memory
and Enter buttons to dial a stored phone number. Same as the DS=
and Enter buttons to start the remote digital loopback test. The TEST IN
button several times. To save the number, press the Enter button.
and
buttons. To go to the next position, press the
button. To go to the next LCD, press the
button. To back up or to exit without
button several times. To save the
Chapter 3 – Using the Front Panel
and Enter buttons again.
and Enter buttons again. Same
and Enter buttons again. Same
and
button.
button.
27