MT5600BA-V92-NAM Multi-Tech Systems, MT5600BA-V92-NAM Datasheet - Page 39

• Manufacturer Part Number: MT5600BA-V92-NAM
• Description: MODEM V.92 WORLD DATA/FAX LEASE
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® IIr

Specifications of MT5600BA-V92-NAM

• Data Format: V.92
• Interface: RS-232
• Voltage - Supply: 9 V ~ 12 V
• Mounting Type: Desktop
• Package / Case: 9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1018

Your modem was thoroughly tested at the factory before it was shipped. If you are unable to make a
successful connection, or if you experience data loss or garbled characters during your connection, it is
possible that the modem is defective. However, it is more likely that the source of your problem lies
elsewhere. The following symptoms are typical of problems you might encounter:
If you experience problems, please check the following possibilities before calling Technical Support.
None of the Indicators Light
When you turn on the modem, the LED indicators on the front panel should flash briefly as the modem
runs a self-test, and the liquid crystal display (LCD) should light. If the LEDs and LCD remain off, the
modem is probably not receiving power.
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CAUTION:
another product; doing so can damage the modem and void your warranty.
None of the LEDs light when the modem is on.
The modem does not respond to commands.
The modem cannot connect when dialing.
The modem disconnects while online.
The modem cannot connect when answering.
File transfer is slower than it should be.
Data is being lost.
There are garbage characters on the monitor.
The modem doesn’t work with Caller ID.
Fax and data software can’t run at the same time.
Make sure the modem’s power switch is on, especially if you normally turn the modem on by
turning on a power strip.
If the modem is plugged into a power strip, make sure the power strip is plugged in and its power
switch is on.
Make sure the transformer module is firmly connected to the modem and to the wall outlet or
power strip.
If the power strip is on and the modem switch is on, try moving the transformer module to another
outlet on the power strip.
Test that the outlet is live by plugging another device, such as a lamp, into it.
The modem or transformer module may be defective. If you have another Multi-Tech modem, try
swapping modems. If the problem goes away, the first modem or transformer module may be
defective. Call Technical Support for assistance.
Chapter 7 - Troubleshooting
Do not under any circumstances replace the transformer module with one designed for
Chapter 7 – Troubleshooting
39