C8051F133 Silicon Laboratories Inc, C8051F133 Datasheet - Page 347

• Manufacturer Part Number: C8051F133
• Description: IC 8051 MCU 64K FLASH 64TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F13xr

Specifications of C8051F133

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 100MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 32
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8.25K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP, 64-VQFP
• Data Bus Width: 8 bit
• Data Ram Size: 8.25 KB
• Interface Type: I2C, SMBus, SPI, UART
• Maximum Clock Frequency: 100 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 16 bit
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit to 12 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No
• Other names: 336-1150

C8051F120/1/2/3/4/5/6/7
C8051F130/1/2/3
25.3. Debug Support
Each MCU has on-chip JTAG and debug logic that provides non-intrusive, full speed, in-circuit debug sup-
port using the production part installed in the end application, via the four pin JTAG I/F. Silicon Labs' debug
system supports inspection and modification of memory and registers, breakpoints, and single stepping.
No additional target RAM, program memory, or communications channels are required. All the digital and
analog peripherals are functional and work correctly (remain synchronized) while debugging. The Watch-
dog Timer (WDT) is disabled when the MCU is halted during single stepping or at a breakpoint.
The C8051F120DK is a development kit with all the hardware and software necessary to develop applica-
tion code and perform in-circuit debug with each MCU in the C8051F12x and C8051F13x device families.
Each kit includes development software for the PC, a Serial Adapter (for connection to JTAG) and a target
application board with a C8051F120 installed. Serial cables and wall-mount power supply are also
included.
Rev. 1.4
347