MC68HC908GR8CP Freescale Semiconductor, MC68HC908GR8CP Datasheet - Page 27

• Manufacturer Part Number: MC68HC908GR8CP
• Description: IC MCU FLASH 8BIT 8MHZ 4K 28-DIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908GR8CP

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 17
• Program Memory Size: 7.5KB (7.5K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.600", 15.24mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

MC68HC908GR8 — Rev 4.0
MOTOROLA
Freescale Semiconductor, Inc.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For More Information On This Product,
7680 bytes of on-chip FLASH memory on the MC68HC908GR8
and 4096 bytes of on-chip FLASH memory on the
MC68HC908GR4 with in-circuit programming capabilities of
FLASH program memory
384 bytes of on-chip random-access memory (RAM)
Serial peripheral interface module (SPI)
Serial communications interface module (SCI)
One 16-bit, 2-channel timer (TIM1) and one 16-bit, 1-channel
timer (TIM2) interface modules with selectable input capture,
output compare, and PWM capability on each channel
6-channel, 8-bit successive approximation analog-to-digital
converter (ADC)
BREAK module (BRK) to allow single breakpoint setting during in-
circuit debugging
Internal pullups on IRQ and RST to reduce customer system cost
Clock generator module with on-chip 32-kHz crystal compatible
PLL (phase-lock loop)
Up to 21 general-purpose input/output (I/O) pins, including:
– 19 shared-function I/O pins
– Up to two dedicated I/O pins, depending on package choice
Selectable pullups on inputs only on ports A, C, and D. Selection
is on an individual port bit basis. During output mode, pullups are
disengaged.
High current 10-mA sink/10-mA source capability on all port pins
Higher current 15-mA sink/source capability on PTC0–PTC1
Timebase module with clock prescaler circuitry for eight user
selectable periodic real-time interrupts with optional active clock
source during stop mode for periodic wakeup from stop using an
external 32-kHz crystal
Oscillator stop mode enable bit (OSCSTOPENB) in the CONFIG
register to allow user selection of having the oscillator enabled or
disabled during stop mode
Go to: www.freescale.com
General Description
General Description
Technical Data
Features
27