SAK-XE167KM-48F80L AA Infineon Technologies, SAK-XE167KM-48F80L AA Datasheet - Page 95

• Manufacturer Part Number: SAK-XE167KM-48F80L AA
• Description: IC MCU 16BIT FLASH 144-LQFP
• Manufacturer: Infineon Technologies
• Series: XE16xr

Specifications of SAK-XE167KM-48F80L AA

• Core Processor: C166SV2
• Core Size: 16-Bit
• Speed: 80MHz
• Connectivity: EBI/EMI, I²C, LIN, SPI, SSC, UART/USART, USI
• Peripherals: I²S, POR, PWM, WDT
• Number Of I /o: 119
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 34K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-LFQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: SP000628648

XE167FM, XE167GM, XE167HM, XE167KM
XE166 Family Derivatives / Base Line
Electrical Parameters
1)The pad supply voltage pins (
) provide the input current for the on-chip EVVRs
V
DDPB
and the current consumed by the pin output drivers. A small current is consumed
because the drivers’ input stages are switched.
2) Please consider the additional conditions described in section “Active Mode Power Supply Current”.
3) The pad supply voltage has only a minor influence on this parameter.
Active Mode Power Supply Current
The actual power supply current in active mode not only depends on the system
frequency but also on the configuration of the XE167xM’s subsystem.
Besides the power consumed by the device logic
(Table
15) the power supply pins also
provide the current that flows through the pin output drivers.
A small current is consumed because the drivers’ input stages are switched.
V
The IO power domains can be supplied separately. Power domain A (
) supplies the
DDPA
V
A/D converters and Port 6. Power domain B (
) supplies the on-chip EVVRs and all
DDPB
other ports.
During operation domain A draws a maximum current of 1.5 mA for each active A/D
V
converter module from
.
DDPA
In Fast Startup Mode (with the Flash modules deactivated), the typical current is reduced
f
to 3 + 0.6×
mA.
SYS
Data Sheet
95
V2.0, 2009-03