MCF5214CVF66J Freescale Semiconductor, MCF5214CVF66J Datasheet - Page 569

• Manufacturer Part Number: MCF5214CVF66J
• Description: IC MCU 256K FLASH 256MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF521xr

Specifications of MCF5214CVF66J

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 142
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Processor Series: MCF521x
• Core: ColdFire V2
• 3rd Party Development Tools: JLINK-CF-BDM26, EWCF
• Development Tools By Supplier: M52210DEMO, M52211EVB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No

Figure 28-18
is selected, none of the MA signals can be used for analog or digital inputs. They become multiplexed
address outputs and are unaffected by DDRQA[1:0].
28.7.2.2 Module Version Options
The number of available analog channels varies, depending on whether external multiplexing is used. A
maximum of eight analog channels are supported by the internal multiplexing circuitry of the converter.
Table 28-21
chips.
28.7.3
This section describes the QADC analog subsystem, which includes the front-end analog multiplexer and
analog-to-digital converter.
28.7.3.1 Analog-to-Digital Converter Operation
The analog subsystem consists of the path from the input signals to the A/D converter block. Signals from
the queue control logic are fed to the multiplexer and state machine. The end-of-conversion (EOC) signal
and the successive approximation register (SAR) reflect the result of the conversion.
a block diagram of the QADC analog subsystem.
Freescale Semiconductor
Analog Subsystem
shows the total number of analog input channels supported with 0 to 4 external multiplexer
1
2
shows that the two MA signals may also be analog input signals. When external multiplexing
No External Mux
The external trigger inputs are not shared with two analog input signals.
When external multiplexing is used, two input channels are configured as multiplexed address
outputs, and for each external multiplexer chip, one input channel is a multiplexed analog input.
8
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
Directly Connected + External Multiplexed = Total Channels
One External
Number of Analog Input Channels Available
5 + 4 = 9
Mux
Table 28-21. Analog Input Channels
Two External
4 + 8 = 12
Muxes
Three External
3 + 12 = 15
Muxes
Queued Analog-to-Digital Converter (QADC)
1, 2
Four External
2 + 16 = 18
Muxes
Figure 28-19
shows
28-31