HD64F3694FTV Renesas Electronics America, HD64F3694FTV Datasheet - Page 292

• Manufacturer Part Number: HD64F3694FTV
• Description: IC H8/3694F MCU FLASH 48-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3694FTV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI
• Peripherals: PWM, WDT
• Number Of I /o: 29
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 48-QFN
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 15 I
15.5
There are six interrupt requests in this module; transmit data empty, transmit end, receive data full,
NACK receive, STOP recognition, and arbitration lost/overrun. Table 15.3 shows the contents of
each interrupt request.
Table 15.3 Interrupt Requests
When interrupt conditions described in table 15.3 are 1 and the I bit in CCR is 0, the CPU
executes an interrupt exception processing. Interrupt sources should be cleared in the exception
processing. TDRE and TEND are automatically cleared to 0 by writing the transmit data to
ICDRT. RDRF are automatically cleared to 0 by reading ICDRR. TDRE is set to 1 again at the
same time when transmit data is written to ICDRT. When TDRE is cleared to 0, then an excessive
data of one byte may be transmitted.
Rev.5.00 Nov. 02, 2005 Page 262 of 418
REJ09B0028-0500
Interrupt Request
Transmit Data Empty
Transmit End
Receive Data Full
STOP Recognition
NACK Receive
Arbitration
Lost/Overrun
Interrupt Request
2
C Bus Interface 2 (IIC2)
Abbreviation
TXI
TEI
RXI
STPI
NAKI
Interrupt Condition
(TEND = 1) (TEIE = 1)
(STOP = 1) (STIE = 1)
(TDRE = 1) (TIE = 1)
(RDRF = 1) (RIE = 1)
{(NACKF = 1) + (AL = 1)}
(NAKIE = 1)
I
2
C Mode
Clocked
Synchronous
Mode