S9S12HY64J0MLL Freescale Semiconductor, S9S12HY64J0MLL Datasheet - Page 711

• Manufacturer Part Number: S9S12HY64J0MLL
• Description: MCU 64K FLASH AUTO 100-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S9S12HY64J0MLL

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, LIN, SCI, SPI
• Peripherals: LCD, Motor control PWM, POR, PWM, WDT
• Number Of I /o: 80
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 100-LQFP
• Controller Family/series: S12
• No. Of I/o's: 80
• Ram Memory Size: 4KB
• Cpu Speed: 64MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Processor Series: S12HY
• Core: HCS12
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: DEMO9S12HY64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

19.4.5
During wait mode, the operation of the motor controller pins are selectable between the following two
options:
19.4.6
All module clocks are stopped and the associated port pins are set to their inactive state, which is defined
by the state of the RECIRC bit. The motor controller module registers stay the same as they were prior to
entering stop or pseudo-stop modes. Therefore, after exiting from stop or pseudo-stop modes, the
associated port pins will resume to the same functionality they had prior to entering stop or pseudo-stop
modes.
19.5
The motor controller is reset by system reset. All associated ports are released, all registers of the motor
controller module will switch to their reset state as defined in
19.6
The motor controller has one interrupt source.
19.6.1
An interrupt will be requested when the MCTOIE bit in the motor controller control register 1 is set and
the running PWM frame is finished. The interrupt is cleared by either setting the MCTOIE bit to 0 or to
write a 1 to the MCTOIF bit in the motor controller control register 0.
Freescale Semiconductor
1. MCSWAI = 1: All module clocks are stopped and the associated port pins are set to their inactive
2.
state, which is defined by the state of the RECIRC bit during wait mode. The motor controller
module registers stay the same as they were prior to entering wait mode. Therefore, after exiting
from wait mode, the associated port pins will resume to the same functionality they had prior to
entering wait mode.
functionality they had prior to entering wait mode both during wait mode and after exiting wait
mode.
MCSWAI = 0: The PWM clocks continue to run and the associated port pins maintain the
Reset
Interrupts
Operation in Wait Mode
Operation in Stop and Pseudo-Stop Modes
Timer Counter Overflow Interrupt
MC9S12HY/HA-Family Reference Manual, Rev. 1.04
Section 19.3.2, “Register
Motor Controller (MC10B8CV1)
Descriptions”.
711