ST7FLITE25M6TR STMicroelectronics, ST7FLITE25M6TR Datasheet - Page 44

• Manufacturer Part Number: ST7FLITE25M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE25M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
Table 19. SCIx_GetByte
Notes:
– You can use some timeout protection while using this function.
– This function can be used in Polling or Interrupt driven mode.
44/235
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
SCIx_GetByte
Unsigned char SCIx_GetByte (void)
Returns the most recent Byte received in Polling or Inter-
rupt driven mode.
None
Unsigned char
Received data byte
1. The SCIx_Mode must have been called
2. You must have called SCIx_IsReceptionCompleted to
check the reception status.
3. You must enable the interrupt due to Receive Data
Ready flag for Interrupt driven mode.
4. You must select Polling or Interrupt driven Reception
mode in ST7lib_Config.h.
5. For Interrupt driven mode SCIx_IT_Function must
have been called inside the SCI interrupt subroutine.
None
None
None