ST7FLITE25M6TR STMicroelectronics, ST7FLITE25M6TR Datasheet - Page 227

• Manufacturer Part Number: ST7FLITE25M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE25M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

9.2 APPLICATION SPECIFIC PERIPHERALS
9.2.1 CAN LIBRARY FUNCTION LIST
This part of the user manual contains the detailed description of all the functions for the CAN
Library.
Note: These functions are only available for the ST72F561 CAN Peripheral.
9.2.1.1 Initialization-Services
Table 171. CanInitPowerOn
Table 172. CanInit
Function Name
Function Name
Function Prototype
Input Parameters
Output Parameters
Behaviour Description
Function Prototype
Input Parameters
Output Parameters
Behaviour Description
Required Preconditions
CanInitPowerOn
CanInit
void CanInitPowerOn (void)
None
None
This service initializes the CAN driver internal
variables. Indication and Confirmation flags are
reset. Tx/Rx buffers are cleared.
void CanInit (CanInitHandle <initObject>)
initObject - Selected Initialization Mode.
For example- If the value passed is 0, the Can-
Controller will be initialized with the values of init
table (0).
None
This service initializes the CAN Controller regis-
ters with the values stored in the init table corre-
sponding to the <initObject>. Pending transmit
requests within the CAN controller are deleted.
Receive FIFO is released.
The function shall be called after CanInitPow-
erOn( ) and before any other services of the driv-
er.
Function Descriptions
227/235