ST7FLITE25F1B6 STMicroelectronics, ST7FLITE25F1B6 Datasheet - Page 217

• Manufacturer Part Number: ST7FLITE25F1B6
• Description: IC MCU 8BIT 8K FLASH 20-DIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE25F1B6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 165. EEPROM_Programming
Notes:
– Care should be taken during programming cycle. Writing to the same memory location will
– Reading the EEPROM memory is not possible when the data writing is in progress.
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
over-program the memory. If a programming cycle is interrupted (by software or a reset ac-
tion), the integrity of the data in memory is not guaranteed.
EEPROM_Programming
Prog_Status EEPROM_Programming (void)
Starts writing data bytes from EEPROM latches to EEP-
ROM cells and returns the programming status.
None
EEPROM_PROG_COMPLETE
If all data bytes are written from latch to EEPROM cells.
EEPROM_PROG_PROGRESS
If programming cycle is in progress.
EEPROM_Write must have been called.
None
This function can be looped, until the programming cycle
is complete.
EEPROM_Write
Function Descriptions
217/235