AT91SAM7X512-AU-999 Atmel, AT91SAM7X512-AU-999 Datasheet - Page 107

• Manufacturer Part Number: AT91SAM7X512-AU-999
• Description: IC MCU ARM 512K HS FLASH 100LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7X512-AU-999

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: CAN, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

AT91SAM7X512/256/128 Preliminary
To run one of these commands, the field FCMD of the MC_FCR register has to be written with
the command number. As soon as the MC_FCR register is written, the FRDY flag is automati-
cally cleared. Once the current command is achieved, then the FRDY flag is automatically set. If
an interrupt has been enabled by setting the bit FRDY in MC_FMR, the interrupt line of the Mem-
ory Controller is activated.
All the commands are protected by the same keyword, which has to be written in the eight high-
est bits of the MC_FCR register.
Writing MC_FCR with data that does not contain the correct key and/or with an invalid command
has no effect on the memory plane; however, the PROGE flag is set in the MC_FSR register.
This flag is automatically cleared by a read access to the MC_FSR register.
When the current command writes or erases a page in a locked region, the command has no
effect on the whole memory plane; however, the LOCKE flag is set in the MC_FSR register. This
flag is automatically cleared by a read access to the MC_FSR register.
107
6120H–ATARM–17-Feb-09