ATMEGA3290P-20AU Atmel, ATMEGA3290P-20AU Datasheet - Page 156

• Manufacturer Part Number: ATMEGA3290P-20AU
• Description: IC MCU 32K 4X40 LCD CTRL 100TQFP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA3290P-20AU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: SPI, UART/USART, USI
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Processor Series: ATMEGA32x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, USART, USI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 69
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Package: 100TQFP
• Device Core: AVR
• Family Name: ATmega
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• Controller Family/series: AVR MEGA
• No. Of I/o's: 69
• Eeprom Memory Size: 1KB
• Ram Memory Size: 2KB
• Cpu Speed: 20MHz
• Rohs Compliant: Yes
• For Use With: ATSTK600-TQFP100 - STK600 SOCKET/ADAPTER 100-TQFP770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1005 - ISP 4PORT FOR ATMEL AVR MCU JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPIATAVRISP2 - PROGRAMMER AVR IN SYSTEMATSTK504 - STARTER KIT AVR EXP MOD 100P LCDATJTAGICE2 - AVR ON-CHIP D-BUG SYSTEM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ATMEGA3290P-16AU; ATMEGA3290P-16AU

8021G–AVR–03/11
When OC2A is connected to the pin, the function of the COM2A1:0 bits depends on the
WGM21:0 bit setting.
are set to a normal or CTC mode (non-PWM).
Table 17-3.
Table 17-4
mode.
Table 17-4.
Note:
Table 17-5
rect PWM mode.
Table 17-5.
Note:
• Bit 2:0 – CS22:0: Clock Select
The three Clock Select bits select the clock source to be used by the Timer/Counter, see
17-6 on page
COM2A1
COM2A1
COM2A1
0
0
1
1
0
0
1
1
0
0
1
1
1. A special case occurs when OCR2A equals TOP and COM2A1 is set. In this case, the com-
1. A special case occurs when OCR2A equals TOP and COM2A1 is set. In this case, the com-
pare match is ignored, but the set or clear is done at BOTTOM. See
page 147
pare match is ignored, but the set or clear is done at TOP. See
page 149
shows the COM2A1:0 bit functionality when the WGM21:0 bits are set to fast PWM
shows the COM21:0 bit functionality when the WGM21:0 bits are set to phase cor-
157.
Compare Output Mode, non-PWM Mode
Compare Output Mode, Fast PWM Mode
Compare Output Mode, Phase Correct PWM Mode
COM2A0
COM2A0
COM2A0
for more details.
for more details.
0
1
0
1
0
1
0
1
Table 17-3
0
1
0
1
Description
Normal port operation, OC2A disconnected.
Reserved
Clear OC2A on compare match, set OC2A at BOTTOM
(non-inverting mode)
Set OC2A on compare match, clear OC2A at BOTTOM
(inverting mode).
Description
Normal port operation, OC2A disconnected.
Reserved
Clear OC2A on compare match when up-counting. Set OC2A on
compare match when counting down.
Set OC2A on compare match when up-counting. Clear OC2A on
compare match when counting down.
Description
Normal port operation, OC2A disconnected.
Toggle OC2A on compare match.
Clear OC2A on compare match.
Set OC2A on compare match.
shows the COM2A1:0 bit functionality when the WGM21:0 bits
(1)
ATmega329P/3290P
(1)
”Phase Correct PWM Mode” on
”Fast PWM Mode” on
Table
156