PIC24FJ256GA106T-I/PT Microchip Technology, PIC24FJ256GA106T-I/PT Datasheet - Page 35

• Manufacturer Part Number: PIC24FJ256GA106T-I/PT
• Description: IC PIC MCU FLASH 256K 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256GA106T-I/PT

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (85.5K x 24)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DM240011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• A/d Bit Size: 10 bit
• A/d Channels Available: 16
• Height: 1 mm
• Length: 10 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2 V
• Width: 10 mm
• For Use With: MA240015 - BOARD MCV PIM FOR 24F256GADM240011 - KIT STARTER MPLAB FOR PIC24F MCUAC164327 - MODULE SKT FOR 64TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC24FJ256GA106T-I/PTTR

Table 4-3
PIC24FJXXXGA3 Configuration bits in the Flash
Configuration Words.
TABLE 4-3:
 2010 Microchip Technology Inc.
ALTVREF<1:0>
BBEN
BBDIS
BOREN
BORV
DEBUG
DSBITEN
DSWDTEN
DSBOREN
DSWDTOSC
Note 1:
Note:
2:
3:
Bit Field
Bits<23:16> should be programmed to a value of 0x00 to ensure that accidental program execution of any
of the Configuration Words would be interpreted as a NOP opcode.
The JTAGEN bit can be modified only using In-Circuit Serial Programming™ (ICSP™).
Irrespective of the WPCFG status, if WPEND = 1 or if WPFP corresponds to the Configuration Words
page, the Configuration Words page will be protected
Although not implemented with a specific
function, the bit at CW1<15> must always
be maintained as ‘0’ to ensure device
functionality, regardless of the settings of
other Configuration bits.
provides
PIC24FJXXXGA3 CONFIGURATION BITS DESCRIPTION
the
CW2<12:11> Alternate V
Register
descriptions
CW4<10>
CW3<12>
CW1<11>
CW2<2>
CW2<3>
CW4<8>
CW4<7>
CW4<6>
CW4<5>
PIC24FJXXXDA1/DA2/GB2/GA3
(1)
00 = AV
01 = AV
10 = AV
11 = AV
Back Bias Enable bit
0 = Back bias is disabled
1 = Back bias is enabled
Back Bias Feature Disable bit
0 = Back bias feature enabled in Deep Sleep
1 = Back bias feature disabled
Brown-out Reset Enable bit
0 = BORMV is disabled
1 = BORMV is enabled outside of Deep Sleep (BORMV is always
Brown-out Reset Voltage bit
0 = BORMV trip point is 1.8V min
1 = BORMV trip point is 2.0V min
Background Debugger Enable bit
1 = Device resets into Operational mode
0 = Device resets into Debug mode
Deep Sleep Control bit
0 = Deep Sleep operation is always disabled
1 = Deep Sleep is controlled by the register bit, DSEN
Deep Sleep Watchdog Timer Enable bit
1 = DSWDT is enabled
0 = DSWDT is disabled
Deep Sleep BOR Enable bit
1 = BOR is enabled in Deep Sleep
0 = BOR is disabled in Deep Sleep (does not affect Sleep mode)
DSWDT Reference Clock Select bit
1 = DSWDT uses LPRC as reference clock
0 = DSWDT uses SOSC as reference clock
for
disabled in Deep Sleep)
the
REF
REF
REF
REF
REF
AND CV
is in alternate location and CV
is in default location and CV
is in default location and CV
/CV
REF
REF
Location Enable bit
are in alternate locations
Description
REF
REF
REF
is in alternate location
is in default location
is in default location
DS39970B-page 35