PIC18F46J11-I/PT Microchip Technology, PIC18F46J11-I/PT Datasheet - Page 52

• Manufacturer Part Number: PIC18F46J11-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J11-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 34
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DV164136, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F46J11 FAMILY
3.6.9
Deep
Register 3-1 through Register 3-6.
REGISTER 3-1:
REGISTER 3-2:
DS39932C-page 52
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6-3
bit 2
bit 1
bit 0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-3
bit 2
bit 1
bit 0
Note 1:
DSEN
R/W-0
U-0
—
Sleep
(1)
In order to enter Deep Sleep, Sleep must be executed immediately after setting DSEN.
This is the value when V
DEEP SLEEP MODE REGISTERS
mode
DSEN: Deep Sleep Enable bit
1 = Deep Sleep mode is entered on a SLEEP command
0 = Sleep mode is entered on a SLEEP command
Unimplemented: Read as ‘0’
(Reserved): Always write ‘0’ to this bit
DSULPEN: Ultra Low-Power Wake-up Module Enable bit
1 = ULPWU module is enabled in Deep Sleep
0 = ULPWU module is disabled in Deep Sleep
RTCWDIS: RTCC Wake-up Disable bit
1 = Wake-up from RTCC is disabled
0 = Wake-up from RTCC is enabled
Unimplemented: Read as ‘0’
ULPWDIS: Ultra Low-Power Wake-up Disable bit
1 = ULPWU wake-up source is disabled
0 = ULPWU wake-up source is enabled (must also set DSULPEN = 1)
DSBOR: Deep Sleep BOR Event Status bit
1 = DSBOREN was enabled and V
0 = DSBOREN was disabled or V
RELEASE: I/O Pin State Release bit
Upon waking from Deep Sleep, the I/O pins maintain their previous states. Clearing this bit will
release the I/O pins and allow their respective TRIS and LAT bits to control their states.
but did not fall below V
U-0
U-0
—
—
DSCONH: DEEP SLEEP CONTROL HIGH BYTE REGISTER (BANKED F4Dh)
DSCONL: DEEP SLEEP CONTROL LOW BYTE REGISTER (BANKED F4Ch)
registers
W = Writable bit
W = Writable bit
‘1’ = Bit is set
‘1’ = Bit is set
are
U-0
U-0
DD
—
—
is initially applied.
provided
DSBOR
(1)
DD
U-0
U-0
—
—
DD
in
did not drop below the DSBOR arming voltage during Deep Sleep
dropped below the DSBOR arming voltage during Deep Sleep,
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
U-0
—
—
(Reserved)
ULPWDIS
R/W-0
R/W-0
© 2009 Microchip Technology Inc.
x = Bit is unknown
x = Bit is unknown
DSULPEN
R/W-0
DSBOR
R/W-0
(1)
RTCWDIS
RELEASE
R/W-0
R/W-0
(1)
bit 0
bit 0