PIC18F46J11-I/PT Microchip Technology, PIC18F46J11-I/PT Datasheet - Page 253

• Manufacturer Part Number: PIC18F46J11-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J11-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 34
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DV164136, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.5.2
In Full-Bridge mode, all four pins are used as outputs.
An example of a full-bridge application is provided in
Figure 17-10.
In the Forward mode, the PxA pin is driven to its active
state, the PxD pin is modulated, while the PxB and PxC
pins will be driven to their inactive state as provided in
Figure 17-11.
FIGURE 17-10:
© 2009 Microchip Technology Inc.
FULL-BRIDGE MODE
PxA
PxB
PxC
PxD
EXAMPLE OF FULL-BRIDGE APPLICATION
FET
Driver
FET
Driver
QA
QB
PIC18F46J11 FAMILY
In the Reverse mode, the PxC pin is driven to its active
state, the PxB pin is modulated, while the PxA and PxD
pins will be driven to their inactive state as provided
Figure 17-11.
The PxA, PxB, PxC and PxD outputs are multiplexed
with the PORT data latches. The associated TRIS bits
must be cleared to configure the PxA, PxB, PxC and
PxD pins as outputs.
Load
V+
V-
QC
QD
FET
Driver
FET
Driver
DS39932C-page 253