PIC12C672-10E/P Microchip Technology, PIC12C672-10E/P Datasheet - Page 377

• Manufacturer Part Number: PIC12C672-10E/P
• Description: IC MCU OTP 2KX14 A/D 8DIP
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C672-10E/P

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 10 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 8
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8
• Data Rom Size: 128 B
• Height: 3.3 mm
• Length: 9.27 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 3 V
• Width: 6.35 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

20.5.1
20.5.2
1997 Microchip Technology Inc.
External Reference Signal
Internal Reference Signal
When external voltage references are used, the comparator module can be configured to have
the comparators operate from the same or different reference sources. The reference signal must
be between V
The comparator module also allows the selection of an internally generated voltage reference for
the comparators. The
Reference Module that provides this signal. The internal reference signal is used when the com-
parators are in mode CM2:CM0 = 010
is applied to the V
The internal voltage reference may be used in any comparator mode. When used in this fashion
the I/O/V
REF
pin may be used for I/O. The voltage reference is connected to the V
SS
and V
IN
+ input of both comparators.
“Voltage Reference”
DD
, and can be applied to either pin of the comparator(s).
Section 20. Comparator
(Figure
section contains a detailed description of the Voltage
20-1). In this mode, the internal voltage reference
DS31020A-page 20-7
REF
pin.
20