PIC16HV785-I/SO Microchip Technology, PIC16HV785-I/SO Datasheet - Page 87

• Manufacturer Part Number: PIC16HV785-I/SO
• Description: IC PIC MCU FLASH 2KX14 20SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16HV785-I/SO

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 17
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Controller Family/series: PIC16HV
• No. Of I/o's: 18
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 128Byte
• Cpu Speed: 20MHz
• Processor Series: PIC16H
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: RS- 232, USB
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 18
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DV164120, DM163029
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 14 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT20SO1-1 - SOCKET TRANS ICE 20DIP TO 20SOICAC162060 - HEADER INTRFC MPLAB ICD2 20PINAC164039 - MODULE SKT PROMATE II 20DIP/SOIC
• Connectivity: -
• Lead Free Status / Rohs Status: Details

12.1.7
After the A/D module has been configured as desired,
the selected channel must be acquired before the
conversion is started. The analog input channels must
have their corresponding TRIS bits selected as inputs.
To determine sample time, see Table 19-16 and
Table 19-17. After this sample time has elapsed, the
A/D conversion can be started.
These steps should be followed for an A/D conversion:
1.
2.
3.
4.
5.
6.
7.
© 2006 Microchip Technology Inc.
Configure the A/D module:
• Configure analog/digital I/O (ANSx)
• Select A/D conversion clock (ADCON1<6:4>)
• Configure voltage reference (ADCON0<6>)
• Select A/D input channel (ADCON0<5:2>)
• Select result format (ADCON0<7>)
• Turn on A/D module (ADCON0<0>)
Configure A/D interrupt (if desired):
• Clear ADIF bit (PIR1<6>)
• Set ADIE bit (PIE1<6>)
• Set PEIE and GIE bits (INTCON<7:6>)
Wait the required acquisition time.
Start conversion:
• Set GO/DONE bit (ADCON0<1>)
Wait for A/D conversion to complete, by either:
• Polling for the GO/DONE bit to be cleared
• Waiting for the A/D interrupt
Read A/D Result register pair
(ADRESH:ADRESL), clear bit ADIF if required.
For next conversion, go to step 1 or step 2 as
required. The A/D conversion time per bit is
defined as T
required before the next acquisition starts.
(with interrupts disabled); OR
CONFIGURING THE A/D
AD
. A minimum wait of 2 T
AD
is
Preliminary
EXAMPLE 12-1:
;This code block configures the A/D
;for polling, Vdd reference, R/C clock
;and RA0 input.
;
;Conversion start and wait for complete
;polling code included.
;
BCF
BSF
MOVLW
MOVWF
BSF
BSF
BCF
MOVLW
MOVWF
CALL
BSF
BTFSC
GOTO
MOVF
MOVWF
BSF
MOVF
BCF
MOVWF
PIC16F785/HV785
STATUS,RP1
STATUS,RP0
B’01110000’ ;A/D RC clock
ADCON1
TRISA,0
ANSEL0,0
STATUS,RP0
B’10000001’ ;Right, Vdd Vref, AN0
ADCON0
SampleTime
ADCON0,GO
ADCON0,GO
$-1
ADRESH,W
RESULTHI
STATUS,RP0
ADRESL,W
STATUS,RP0
RESULTLO
A/D CONVERSION
;Bank 1
;
;Set RA0 to input
;Set RA0 to analog
;Bank 0
;Wait min sample time
;Start conversion
;Is conversion done?
;No, test again
;Read upper 2 bits
;Bank 1
;Read lower 8 bits
;Bank 0
DS41249D-page 85