PIC12CE518-04I/SN Microchip Technology, PIC12CE518-04I/SN Datasheet - Page 490

• Manufacturer Part Number: PIC12CE518-04I/SN
• Description: IC MCU OTP 512X12 W/EE 8SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12CE518-04I/SN

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 768B (512 x 12)
• Program Memory Type: OTP
• Eeprom Size: 16 x 8
• Ram Size: 25 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (3.9mm Width)
• For Use With: 309-1046 - ADAPTER 8-SOIC TO 8-DIP309-1045 - ADAPTER 8-SOIC TO 8-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Connectivity: -

PICmicro MID-RANGE MCU FAMILY
26.3.1
26.3.2
DS31026A-page 26-6
Config. bits
OPTION_REG
Legend: Shaded cells are not used by the Watchdog Timer.
Name
WDT Period
WDT Programming Considerations
MPEEN
RBPU
Bit 7
The WDT has a nominal time-out period of 18 ms, (with no postscaler). The time-out period var-
ies with temperature, V
time-outs are desired, a postscaler with a division ratio of up to 1:128 can be assigned to the
WDT, under software control, by writing to the OPTION_REG register. Thus, time-out periods of
up to 2.3 seconds can be realized.
The
and prevent it from timing out and generating a device RESET.
The TO bit in the STATUS register will be cleared upon a Watchdog Timer time-out (WDT Reset
and WDT wake-up).
It should also be taken in account that under worst case conditions (V
ture = Maximum, maximum WDT postscaler) it may take several seconds before a WDT time-out
occurs.
Table 26-1: Summary of Watchdog Timer Registers
Note:
CLRWDT
INTEDG
BODEN
Bit 6
When the postscaler is assigned to the WDT, always execute a CLRWDT instruction
before changing the postscale value, otherwise a WDT reset may occur.
and
SLEEP
DD
instructions clear the WDT and the postscaler (if assigned to the WDT)
T0CS
Bit 5
CP1
and process variations from part to part (see DC specs). If longer
T0SE
Bit 4
CP0
PWRTE
Bit 3
PSA
WDTE
Bit 2
PS2
1997 Microchip Technology Inc.
DD
FOSC1
= Minimum, Tempera-
Bit 1
PS1
FOSC0
Bit 0
PS0